Re: x2100 processor (2038 Views)
Reply
Advisor
kalervok
Posts: 20
Registered: ‎03-09-2007
Message 1 of 7 (2,038 Views)
Accepted Solution

x2100 processor

What is the fastest processor for my workstation x2100?
Honored Contributor
Eino V
Posts: 2,053
Registered: ‎01-10-2005
Message 2 of 7 (2,038 Views)

Re: x2100 processor

Hi Kalervo

The fastest processor for your computer is 2.8 GHz pentium IV Northwood with 400 MHz FSB for 478 slot. It is quite rare and difficult to get. You can get easyer 2.4 or 2.6 GHz processor.

Eino
Honored Contributor
Eino V
Posts: 2,053
Registered: ‎01-10-2005
Message 3 of 7 (2,038 Views)

Re: x2100 processor

Kalervo

Look here:
http://tinyurl.com/ewrvy
There seems to be also one 2.8 GHz processor.

Eino
Advisor
kalervok
Posts: 20
Registered: ‎03-09-2007
Message 4 of 7 (2,038 Views)

Re: x2100 processor

OK, thanks Eino!
Advisor
kalervok
Posts: 20
Registered: ‎03-09-2007
Message 5 of 7 (2,038 Views)

Re: x2100 processor

How much RAM memory can I install?
Honored Contributor
Eino V
Posts: 2,053
Registered: ‎01-10-2005
Message 6 of 7 (2,038 Views)

Re: x2100 processor

Kalervo

Maximum is 2 Gb. You must use 512 Mb PC800 modules in matched pairs. These pairs can also are of different size. They are quite expensive. Look here:
http://tinyurl.com/2avnd5

Eino
Honored Contributor
Eino V
Posts: 2,053
Registered: ‎01-10-2005
Message 7 of 7 (2,038 Views)

Re: x2100 processor

Kalervo

You can find instruction for installing RAM memory here:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpv38265/lpv38265.pdf

Look at page 121.

Eino
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.