Re: XW6300 (407 Views)
Reply
Occasional Contributor
dcb73
Posts: 8
Registered: ‎04-18-2007
Message 1 of 3 (407 Views)

XW6300

[ Edited ]

Happened upon an xw6300 that was put to the wayside... Why who knows?

Looking at the output of the power supply, I see it won't run anything in an advanced pci-x 16 video card... most of the newer ones requiring at least 22 amps on the 12v rails.

Looking at third party PSUs then saw the post about the xw6000 not taking an antec power supply. Will this be the case also in the xw6200? If so, what are my options in this regard?

 

 

P.S> This thread has been moevd from Archived Desktops and Workstations Boards > general to Workstations - z series, xw series, and legacy x and w series - HP Forums Moderator

Please use plain text.
Occasional Contributor
dcb73
Posts: 8
Registered: ‎04-18-2007
Message 2 of 3 (407 Views)

Re: XW6300

Yes, I have fat fingers....

xw6200
Please use plain text.
Occasional Contributor
dcb73
Posts: 8
Registered: ‎04-18-2007
Message 3 of 3 (407 Views)

Re: XW6300

This is no longer an issue.
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation