01-03-2012 02:15 AM - last edited on 06-09-2013 10:37 PM by maikoro
To set a few BIOS-settings according our policies with the BiosConfigUtility we get on 2 settings an error.
One is the Virtualization Technology (VTx) setting and the other is Virtualization Technology Directed I/O setting.
The error on both is:
<SETTING changeStatus="warning" name="Virtualization Technology (VTx)" reason="BCU: Setting is read-only" returnCode="">
So, a guess it is not possible these settings? Why not? Or is it possible to change and how?
We have to set these settings on >1000 Workstations.
P.S. this thread has been movedfrom Archived Desktops and Workstations Boards > general to Workstations - z series, xw series, and legacy x and w series - Hp Forum Moderator
09-24-2012 12:19 PM
What platform, BIOS revision and version of BCU tool are you seeing this with?
If this is one of the newer platforms, please keep in mind that UEFI BIOS is a big game changer for the entire PC industry. So a number of interoperability behaviors between the BIOS and manageability tools may have changed. A quick simple test is to try applying the changes with a setup password enabled. If the settings apply, then it could be a result of the security enhancements that have come with UEFI. Otherwise, please provide more specific details, including a sample of your config file.
I work for HP, but my posts and replies are my own.
06-23-2014 07:33 AM
I have the same problem. We must du this settings by 3000 EliteDesk 800. The problem is the BIOS version. The problem is only by the newest version (2.30). With the Version 2.05 do it works.
Thanks for helping.