09-11-2012 03:26 PM - edited 09-11-2012 03:29 PM
We have 30 or so t5730 Thin Clients and a few t5740s. So far this month, we've lost six... one by one. When you plug them in, they immediately show a solid green power status light, but do not boot, post, or anything. You are even unable to turn them back off without unplugging them. We pulled one apart and reseated the memory and other components, but it didn't help. Using a power adapter off of a working unit doesn't help either. Out of stuff to try. Any ideas? Thank you for your time.
Solved! Go to Solution.
09-14-2012 04:26 AM
It sounds like you have some environment issues that are killing your TC's. Are they on surge protectors or battery backups?
I work @ a healthcare facility in FL and most of our TC's (t5730/t5740/t5740e) are on surge protectors, and have been running without issue for years.
04-09-2013 03:14 PM
The reason these devices do not boot (which was true for all the ones I had to fix) is that the CMOS battery is drained. Unlike other computers, these thin clients don't simply boot up with a bad system date and show an error. They just don't run.
I bought new CR2032 batteries, opened the thin client, popped out the old battery and installed the new one and closed it back up.
The first time you power up, you'll see solid green lights again, but hold the power button for 10 seconds and make it shutdown.
Press the power button again and let it boot and it will give you a display, and show an error related to the BIOS settings having been reset. Hit f10? to get into the BIOS, set the correct date, arrange it to use the boot order you like, save and exit.
Your thin client should now be functional.
04-09-2013 03:17 PM
10-14-2013 08:23 AM
We are experiencing the same issue with our HP t5730 Thin Clients.
Now I get to replace 100+ batteries, that should keep me busy for a while.
10-23-2013 10:28 AM
Wow... thank you very much. I tossed two of these units out last year because I was afraid that they were dead. I haven't had the problem since until this month where I lost another one that hadn't been plugged in for a few weeks and was working fine prior to unplugging. Ridiculous that this isn't documented anywhere and that HP isn't wasn't aware or didn't let their customers know of this "solution".
Anyway... thanks again. Now I just need to get over the fact that I tossed and replaced $1000 worth of perfectly good and useful hardware.
10-29-2013 01:50 AM
Is there any other causes of this thin client not to boot.
I have taken a Battery from a working Client and put in another thin client and it still wont boot. None of these have been connected to our network as yet. So i know its not our environment.
10-31-2013 04:03 AM
a month ago
Thanks. Fixed a few t5730s and saved our customers 1000s.
How many others have sent these in for repair for 100+ bucks and HP said they replaced motherboard! That is border line fraud in my book. Thanks again for the valuable repair tip!
Instructions for removing covers and such is located here (very easy - just be careful to use the right size screwdriver and firm pressure to avoid stripping screws):