t5630w 07B BSOD after imaging (118 Views)
Reply
Occasional Visitor
mr_gazza
Posts: 2
Registered: ‎12-18-2013
Message 1 of 2 (118 Views)

t5630w 07B BSOD after imaging

Got a t5630w with no HDD, so I'm trying to install XPe (Embedded 2009) onto a USB stick using another USB stick with the image from HP's support page for this model.

The install completes fine (takes about 45min), but it BSODs after displaying the XP boot logo for half a second. Error code 0x0000007B.

Have tried this a couple of times, with different USB sticks to no avail.

Also tried the older XP Embedded image, but this doesn't even install - says initalizing for a minute or so then exits to the D:\ prompt.

Any ideas?

Occasional Visitor
mr_gazza
Posts: 2
Registered: ‎12-18-2013
Message 2 of 2 (79 Views)

Re: t5630w 07B BSOD after imaging

OK, I think I know why this is happening: the HP image is meant for an internal IDE flash based boot, it doesn't include drivers for a USB boot of XPe (is this even possible?) - hence it bsods on boot because the drivers aren't available.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.