Re: t510 WSE7 - Get into Administrator Login from Connnection Manager Kiosk Mode (17786 Views)
Reply
Regular Advisor
Posts: 75
Registered: ‎04-22-2008
Message 1 of 5 (18,074 Views)
Accepted Solution

t510 WSE7 - Get into Administrator Login from Connnection Manager Kiosk Mode

I have just setup the Connection Manager  (2.5.2) to connect to a RDP session in Kiosk Mode.

How to I get back to the windows start menu so I can logout and back in into admin login rather than user login.

(the red dot suggested in documentation is not there)

Or alternatively boot into Administrator login

Or something else? (I have it connected to an HP Device Manager server (so if I can push a setting or command from there, that would work too :)  )

 

Occasional Visitor
Posts: 3
Registered: ‎07-17-2012
Message 2 of 5 (18,069 Views)

Re: t510 WSE7 - Get into Administrator Login from Connnection Manager Kiosk Mode

[ Edited ]

Try this.

Start the Device  and hold the "Shift" Key before the autologin starts.

Regular Advisor
Posts: 75
Registered: ‎04-22-2008
Message 3 of 5 (18,052 Views)

Re: t510 WSE7 - Get into Administrator Login from Connnection Manager Kiosk Mode

thanks, for the suggestion, but .. nope :)

Occasional Visitor
Posts: 2
Registered: ‎09-03-2012
Message 4 of 5 (17,804 Views)

Re: t510 WSE7 - Get into Administrator Login from Connnection Manager Kiosk Mode

Had this same issue myself early on.

 

CTRL-ALT-DEL to Log Off....Hold left shift down whislt logging off.

 

You will then be presented with the Administrator account to logon with.

 

Default password was 'Administrator' on ours from the factory.

Regular Advisor
Posts: 75
Registered: ‎04-22-2008
Message 5 of 5 (17,786 Views)

Re: t510 WSE7 - Get into Administrator Login from Connnection Manager Kiosk Mode

thanks, yes found out the ctrl-alt-del myself ;) forgot to update the post :(
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.