Re: Thin Client t510 - Printer redirect on windows server 2003 (4072 Views)
Reply
Occasional Advisor
Leletto
Posts: 8
Registered: ‎02-11-2013
Message 1 of 12 (4,282 Views)
Accepted Solution

Thin Client t510 - Printer redirect on windows server 2003

Hi all,

 

just bought 4 thin client T510 Flexible. I've attached USB printer ( a Brother HL-2040 or a Brother HL-2130 )  but it didn't redirect on the RDP session. 

I've tried everything in my knowledge but without luck. In the Windows driver options I wrote EXACTLY the server-side name of the printer ( wich is actually the same name identified by the thin client ).

 

I noticed in system information that the RDP version is rdp is 1.6.0-1.45...

 

thank in advance.

Advisor
bpwillia
Posts: 26
Registered: ‎01-07-2013
Message 2 of 12 (4,253 Views)

Re: Thin Client t510 - Printer redirect on windows server 2003

You don't mention which OS you're running, but in ThinPro you have to specify where you want to redirect USB to (Citrix, RDP, etc). I would assume something similar to this exists in the other OS flavors, and I'd start there. On ThinPro 4, by default it's set to not redirect anywhere and I had to tell it to redirect to Citrix before mine would work.

Occasional Advisor
Leletto
Posts: 8
Registered: ‎02-11-2013
Message 3 of 12 (4,235 Views)

Re: Thin Client t510 - Printer redirect on windows server 2003

I think is the SMART ZERO.

 

I can't find any option to "assign" printer to RDP...

 

 

Occasional Advisor
Leletto
Posts: 8
Registered: ‎02-11-2013
Message 4 of 12 (4,205 Views)

Re: Thin Client t510 - Printer redirect on windows server 2003

Problem still not solved...I can't use local printer on remote session. 

 

Please help!

 

Occasional Visitor
Matt-Forbes
Posts: 2
Registered: ‎01-16-2013
Message 5 of 12 (4,190 Views)

Re: Thin Client t510 - Printer redirect on windows server 2003

On the connection you are using, select edit, go to Local Resources and check Enable printer mapping has been selected, this should allow the printer to be redirected.
Occasional Advisor
Leletto
Posts: 8
Registered: ‎02-11-2013
Message 6 of 12 (4,167 Views)

Re: Thin Client t510 - Printer redirect on windows server 2003

Printer mapping already selected, but it didn't works.

 

On the server side I can't see the virtual TS port...

Occasional Advisor
Leletto
Posts: 8
Registered: ‎02-11-2013
Message 7 of 12 (4,072 Views)

Re: Thin Client t510 - Printer redirect on windows server 2003

So there's no way to use a printer with T510 Smart Clients?

Occasional Advisor
Leletto
Posts: 8
Registered: ‎02-11-2013
Message 8 of 12 (4,020 Views)

Re: Thin Client t510 - Printer redirect on windows server 2003

[ Edited ]

Is there some way to get support for T510 by HP? Can't find any solution for this absurd bug!

Visitor
StevenrHbc
Posts: 3
Registered: ‎04-08-2013
Message 9 of 12 (3,957 Views)

Re: Thin Client t510 - Printer redirect on windows server 2003

Depends on what OS you have installed.  If you boot it up and you get a start menu with HP then its running ThinPro.  I have been able to get ThinPro to reconize USB Printers and then bring them to Citrix.  The T510 can have either ThinPro ot Smart Zero.  Smart Zero is just a very thin OS which Puts you right to RDP/Citrix/VM really has no other options.

Occasional Advisor
Leletto
Posts: 8
Registered: ‎02-11-2013
Message 10 of 12 (3,780 Views)

Re: Thin Client t510 - Printer redirect on windows server 2003

After two months, 3 updates and a lot of mail with italian support, this thinclients won't works.

 

Printer redirect didn't works in any way.

 

Tried to connecto to windows server 2008 r2 ( english and italian version),  windows server 2003, even windows 7...results are always the same: no printer redirect!!!

 

Can't belive it...

 

Occasional Visitor
LoneWolf74
Posts: 3
Registered: ‎11-06-2013
Message 11 of 12 (3,266 Views)

Re: Thin Client t510 - Printer redirect on windows server 2003

I have the same problem but I managed to solve.
I bought 10 of these terminals T510 but with the same result on 3 different Windows server 2008 R2 Terminal different  (updated to the latest patch).
Only one of these terminals sold the year before worked and so I checked the version of the software .
By installing the old version of the Smart Zero Client terminals the new T510 work with my printer in the terminal session.
Any new version does not work !

I've tried everything ... this add features such as password storage , support for Velocity , etc ... etc ... but the printer does not work anymore !
I think the change of protocol version RPD to give me problems .
Now I have one here in the office with which I'm trying to figure out if I can solve the problem with the latest versions of the software that I could use .
Back to us , install the Smart Core Zero Image Z6X41019 Rev. 1 ( 7 March 2012 ) and it should work .
PS You must put on the printer in T510 in the driver input the exact name of the driver that you see in Windows also not work .

Occasional Advisor
Leletto
Posts: 8
Registered: ‎02-11-2013
Message 12 of 12 (3,147 Views)

Re: Thin Client t510 - Printer redirect on windows server 2003

Thank you for your information, I'll try to downgrade to that version.

  

For your information the new version didn't work at all.

  

Totally disappointed by hp support. I'll stay away from hp products from now on.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.