02-11-2013 03:04 AM
just bought 4 thin client T510 Flexible. I've attached USB printer ( a Brother HL-2040 or a Brother HL-2130 ) but it didn't redirect on the RDP session.
I've tried everything in my knowledge but without luck. In the Windows driver options I wrote EXACTLY the server-side name of the printer ( wich is actually the same name identified by the thin client ).
I noticed in system information that the RDP version is rdp is 1.6.0-1.45...
thank in advance.
Solved! Go to Solution.
02-12-2013 02:15 PM
You don't mention which OS you're running, but in ThinPro you have to specify where you want to redirect USB to (Citrix, RDP, etc). I would assume something similar to this exists in the other OS flavors, and I'd start there. On ThinPro 4, by default it's set to not redirect anywhere and I had to tell it to redirect to Citrix before mine would work.
02-25-2013 04:14 AM
04-08-2013 10:24 AM
Depends on what OS you have installed. If you boot it up and you get a start menu with HP then its running ThinPro. I have been able to get ThinPro to reconize USB Printers and then bring them to Citrix. The T510 can have either ThinPro ot Smart Zero. Smart Zero is just a very thin OS which Puts you right to RDP/Citrix/VM really has no other options.
06-21-2013 01:44 AM
After two months, 3 updates and a lot of mail with italian support, this thinclients won't works.
Printer redirect didn't works in any way.
Tried to connecto to windows server 2008 r2 ( english and italian version), windows server 2003, even windows 7...results are always the same: no printer redirect!!!
Can't belive it...
11-06-2013 11:52 PM
I have the same problem but I managed to solve.
I bought 10 of these terminals T510 but with the same result on 3 different Windows server 2008 R2 Terminal different (updated to the latest patch).
Only one of these terminals sold the year before worked and so I checked the version of the software .
By installing the old version of the Smart Zero Client terminals the new T510 work with my printer in the terminal session.
Any new version does not work !
I've tried everything ... this add features such as password storage , support for Velocity , etc ... etc ... but the printer does not work anymore !
I think the change of protocol version RPD to give me problems .
Now I have one here in the office with which I'm trying to figure out if I can solve the problem with the latest versions of the software that I could use .
Back to us , install the Smart Core Zero Image Z6X41019 Rev. 1 ( 7 March 2012 ) and it should work .
PS You must put on the printer in T510 in the driver input the exact name of the driver that you see in Windows also not work .
11-27-2013 03:43 AM
Thank you for your information, I'll try to downgrade to that version.
For your information the new version didn't work at all.
Totally disappointed by hp support. I'll stay away from hp products from now on.