05-29-2012 01:50 AM
We are trying to connect a T5325 thin client with a wireless network.
We purchased a HP wireless USB adaptor (part number AK257AA). The model number on the USB adaptor is VNT6656AU.
When the adaptor is plugged in we can see him under 'system information - network' as via1.
The state is enabled and the MAC-address we get is correct.
We've added a wireless connection in the control panel under network connections with wpa2-security (with the passkey entered). We've manually set the ssid also.
However we don't get a ip-address?
Are there some things we should look into or change?
Any help would be very much appreciated.