02-28-2013 05:18 AM
I know I can use Device Manager to remotely reboot/shutdown a t410 thin client however is it possible to do this using a command line from any windows computer?
03-27-2013 01:28 AM
You could connect from Your PC to ThinClient by ssh (use putty/kitty)
login with admin password
give command "shutdown -r 0" =shutdown with restart wait 0 seconds
"shutdown -h 0" =shutdown with halt/off wait 0 seconds
Best regards RadekG
08-07-2014 04:23 PM
I recently picked up a t410 to take advantage of the PoE power options and ran into this issue as well. I get that the Smart Zero Client is meant as an "access device" that provides access to other services and isn't meant as a "server" to get into, and HP is promoting their central-management utilities to make overall management easier. They also provide the VNC shadow so in theory you could VNC into the desktop and then get into an administrator mode, get to the X Terminal and then work from there, but that is a pain. I like the central management tools, but there are some use cases where an SSH server is a real life-saver. In my case I have a suite of automated tools which reach out to my HP thin clients running ThinPro (which has SSHD installed by default and can be easily enabled) to gather system information, perform remote reboots, etc. I'd like to have my t410's be able to fit into that same infrastructure, so having an SSH server is a key part of that.
Having said that, I put together a blog post which outlines the steps necessary to put an SSH server on the t410 and then capture the OS image so it can be easily deployed in place of the default system image. The details are on my blog at: