Firmware upgrade Net Vectra GT310 thin client (1029 Views)
Reply
Occasional Visitor
Posts: 2
Registered: ‎02-28-2005
Message 1 of 31 (1,029 Views)
Accepted Solution

Firmware upgrade Net Vectra GT310 thin client

[ Edited ]

I hoping someone can help me by pointing me to where I can get a hold of the latest firmware for the GT310 thin clients. I need to get to at least D.03.32.

Thanks in advance!

Scott

 

 

P.S. This thread has been moved from Archived Desktops and Workstations Boards > general to Workstations - Thin Clients - Hp Forum Moderator

Honored Contributor
Posts: 1,748
Registered: ‎06-23-2000
Message 2 of 31 (1,029 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Don't know if this will help you or not, but it's worth reading.

http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=100586

-denver
Regular Advisor
Posts: 92
Registered: ‎08-28-2001
Message 3 of 31 (1,029 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Hi Scott,

Where do you want it sent to? (Email)

Regards
Keith
Honored Contributor
Posts: 1,353
Registered: ‎09-09-2002
Message 4 of 31 (1,029 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

I would advise against putting emails on any forum, if you don't want spammers to harvest addresses!.. If you do, then don't use the @ but rather put it in the from xyz at gggbt.abc
If you can keep your head whilst all around you are losing theirs... You haven't understood the situation!
Occasional Visitor
Posts: 2
Registered: ‎02-28-2005
Message 5 of 31 (1,029 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Keith,

If you could, send the file to sp2005 at excite.com. Thanks!

Thanks for the tip Omar!
Regular Advisor
Posts: 92
Registered: ‎08-28-2001
Message 6 of 31 (1,029 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Hi Scott,

The FW is on its way

Keith
Occasional Visitor
Posts: 1
Registered: ‎03-29-2005
Message 7 of 31 (1,029 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Scott, I'm also interested in receiving the firmware for the GT310 device. Please send me or direct me to the whereabouts to this much needed update.

hostmaster @ p3services . com
Occasional Visitor
Posts: 2
Registered: ‎04-28-2005
Message 8 of 31 (1,029 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Can i also have this firmware please
itrc at actionsolutions.com.au

Thanks heaps!
Occasional Visitor
Posts: 2
Registered: ‎04-02-2005
Message 9 of 31 (1,029 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Can someone please send me the firmware too.

kokhuijzen AT wanadoo DOT nl
Regular Advisor
Posts: 92
Registered: ‎08-28-2001
Message 10 of 31 (1,029 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Hi Folks,

Don't want to be difficult, but I only play this forum for the points.

Why don't you all create your only thread, add an entry into this thread so that I get notification, and that way I get the points you kindly give me and you get the Firmware :-)

Regards
Keith
Occasional Visitor
Posts: 2
Registered: ‎04-28-2005
Message 11 of 31 (1,030 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Occasional Visitor
Posts: 2
Registered: ‎05-19-2005
Message 12 of 31 (1,030 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Were you able to get this upgrade? I need it also.
Occasional Advisor
Posts: 11
Registered: ‎06-16-2005
Message 13 of 31 (1,030 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Occasional Advisor
Posts: 7
Registered: ‎10-02-2005
Message 14 of 31 (1,030 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Hello,

could someone that has the latest firmware, please send it to juergen.fleck'at'trabert-fulda.de

thnx in advance
J

p.s. as I see on the bottom of the reply page, you can upload attachments to your post. why did not someone upload the file there? (maybe just a silly question of a lamer ;-)) ??!?!)
Regular Advisor
Posts: 92
Registered: ‎08-28-2001
Message 15 of 31 (1,030 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Hallo Juergen,

Man kann nur datein von Maximal 1MB hochladen, der FW hat 3 MB.

PLease read my previous Entry.

mfg
Keith
Occasional Advisor
Posts: 7
Registered: ‎10-02-2005
Message 16 of 31 (1,030 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Dear Keith,

thanks 4 sending me the firmware, but it is password protected. Could you please mail me the password for the zip-file.

thanks
juergen
Occasional Visitor
Posts: 2
Registered: ‎10-26-2005
Message 17 of 31 (1,030 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Hi Keith,

pleas can you send me the firmware to mmeermann@artada.de ?

Thanks
Occasional Advisor
Posts: 7
Registered: ‎10-02-2005
Message 18 of 31 (1,030 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

I have uploaded the file to rapidshare, so anyone can download it. If this is not appreciated in any way, please reply and I will remove the download link.

http://rapidshare.de/files/6785392/HPnetvectraGT310FirmwareUpdateV332.rar.html
Occasional Visitor
Posts: 2
Registered: ‎10-26-2005
Message 19 of 31 (1,030 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Thanks for the fast reply
Occasional Visitor
Posts: 2
Registered: ‎02-06-2006
Message 20 of 31 (1,030 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

any chance of getting this firmware also, the rapid share link has been deleted

Regards,
Robert
Occasional Advisor
Posts: 7
Registered: ‎10-02-2005
Message 21 of 31 (1,029 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Dear Robert,

if you would have posted a valid mail adress ... I would say, YES ;-)
Occasional Visitor
Posts: 2
Registered: ‎02-06-2006
Message 22 of 31 (1,029 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

robertdukic@bigpond.com would be great. One other question this is gonna sound dumb, what do I use to update it, serial cable USB, etc, I'm new to all this.

Regards, Robert.
Occasional Visitor
Posts: 1
Registered: ‎02-17-2006
Message 23 of 31 (1,029 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

I know this may be getting tiring, but... Is there any way that you could send the firmware to me as well. johny at whitetech.net
Occasional Visitor
Posts: 1
Registered: ‎03-14-2006
Message 24 of 31 (1,029 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Hi, could I get a copy of that as well? I'm also not sure how to upgrade the firmware here either, so any instructions would help. my email is subsound90 at gmail.com. Any help is greatly appriciated!
Occasional Visitor
Posts: 1
Registered: ‎05-22-2006
Message 25 of 31 (1,029 Views)

Re: Firmware upgrade Net Vectra GT310 thin client

Can you please send this upgrade to me as well mail at mdllc.net
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.