Re: Changing the NIC speed settings using HP Device Manager (330 Views)
Reply
Advisor
dibbstibbs
Posts: 39
Registered: ‎08-20-2012
Message 1 of 4 (369 Views)
Accepted Solution

Changing the NIC speed settings using HP Device Manager

We have roughly 100 WES7 T510 Thin Clients in production and need to somehow change the speed of the NIC card from Auto Detect to 100/Full Duplex and would rather not touch each on of these individually.  Is there a easy way to accomplish this using HPDM?  I've looked at the clone & apply settings but don't see anything that's applicable.  

Please use plain text.
Frequent Advisor
Jweinberg
Posts: 69
Registered: ‎06-27-2012
Message 2 of 4 (363 Views)

Re: Changing the NIC speed settings using HP Device Manager

It'll be a registry change. You need to use something like procmon to find out what changes when you change the option via the driver. Then just push the registry change out to the devices.
Please use plain text.
Frequent Advisor
Jweinberg
Posts: 69
Registered: ‎06-27-2012
Message 3 of 4 (362 Views)

Re: Changing the NIC speed settings using HP Device Manager

Please use plain text.
Advisor
dibbstibbs
Posts: 39
Registered: ‎08-20-2012
Message 4 of 4 (330 Views)

Re: Changing the NIC speed settings using HP Device Manager

Thanks for the information as this helped out a lot. 

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation