03-13-2013 05:51 AM
We use SCCM R3, and i installed the HP imaging plug -in 1.1 I read the documentation, and it should be easy to deploy the standard HP t610 image, downloaded from the HP site..
The problem is that can't pre-configure the SCCM client
So i prefer to capture the image with SCCM..
I know that i need to configure some settings like SCCM client, the FBWF, probably adding NIC drivers to boot image, Administrator autoogon etc..
Is there a manual how to capture and deploy the T610 OS with SCCM???
03-18-2013 02:05 PM
The Imaging plug-in for HP Thin Clients can only be used to deploy images and has no capture facilities. You can however, capture a custom image using HP Device Manager or ThinState, and then deploy that image using the SCCM plug-in.
04-04-2013 03:37 AM - edited 04-04-2013 05:59 AM
Sorry for the late reply.
For now we have 2 Thinclients, and i don't want to use another tool like HP Device Manager to capture or deploy images. I like to use SCCM for this.
I found an article to deploy Wyse TC with SCCM, and i'm looking for a similar manual for the T610
I like to use PXE for deployment. Is it possible??
I'm looking into thinstate for capturing.. But all the the HP tools create a .IBR file. For SCCM i need a WIM file. So deployment would be only possible with HP plugin tools.. Correct??
04-12-2013 04:14 AM
I'm in the process of capturing an T610 image with HP thinstate. Only qiestion i have is about the SCCM client. Does thinstate prepare the SCCM client, or do i have to do it manually with CCuDELCert.exe tool??
11-27-2013 03:53 AM
is there any update on this. i would like to capture a WIM image to use deploying the thin clients with SCCM 2012, does anyone know the best way to do this?
11-27-2013 10:33 AM
I have now captured and deployed a T610 using sccm 2012 R2 mostly by following this guide
couple of things i missed initially, included in the guide...
during the capture:
You must disable the EWF, reboot then and also stop the service once its back up. i then went on to have problems due to a config manger client was already installed and out of date. i would suggest uninstalling it anyway by using the c:\windows\system32\ccmsetup\ccmsetup.exe /uninstall command on the client.
following the guide on creating a fresh task sequence and make sure that the partition is not set to use all the drive but 95% otherwise the install wont complete due to no room for the EWF.
04-10-2014 05:11 PM
Just out of curiosity, did you have to use an unattend.xml file in either your Capture or Deployment?
It seems there may be some conflicts with SCCM Task Sequence Capture/Deployment and the HP Image.
I'm using a ProBook MT41 and am also intersted in using SCCM for capturing/deploying.
I can pxe boot and capture/deploy just fine, but it's the fine-tuning of the enabling of Administrator account and other stuff that still seems to be getting overridden by either HP or SCCM.
11-07-2014 05:43 AM
I use a .vbs script that I created as a package in SCCM 2012 R2 (which I'm sure you could probably just run the script in the OSD as well). I call it up at the end of the OSD task sequence. Works like a charm. No need for the unattend.xml.
Here's the script, which sets the threshold for the filter as well as includes exclusions for CM, SCEP and Dragon (dictation software).
Set objShell = WScript.CreateObject ("WScript.Shell")
'Enable File-Based Write Filter
objShell.run "fbwfmgr /enable"
'Set Threshold Size to 512MB
objShell.run "fbwfmgr /setthreshold 512"
'CM File and Folder Exclusions
objShell.run "fbwfmgr /addexclusion C: ""\RegFData"""
objShell.run "fbwfmgr /addexclusion C: ""\Windows\CCM"""
objShell.run "fbwfmgr /addexclusion C: ""\Windows\System32\Wbem"""
objShell.run "fbwfmgr /addexclusion C: ""\_SMSTaskSequence"""
objShell.run "fbwfmgr /addexclusion C: ""\Windows\BootStat.dat"""
'Nuance Dragon Exclusions
objShell.run "fbwfmgr /addexclusion C: ""\ProgramData\Nuance\NaturallySpeaking10"""
'SCEP File and Folder Exclusions
objShell.run "fbwfmgr /addexclusion C: ""\ProgramData\Microsoft\Microsoft Antimalware\Scans\"""
objShell.run "fbwfmgr /addexclusion C: ""\ProgramData\Microsoft\Microsoft Antimalware\Support\"""
objShell.run "fbwfmgr /addexclusion C: ""\Program Files\Microsoft Security Client\"""
objShell.run "fbwfmgr /addexclusion C: ""\Windows\Windowsupdate.log"""
objShell.run "fbwfmgr /addexclusion C: ""\Windows\Temp\MpCmdRun.log"""
objShell.run "fbwfmgr /addexclusion C: ""\Windows\ServiceProfiles\LocalService\AppData\Lo
objShell.run "fbwfmgr /addexclusion C: ""\Windows\ServiceProfiles\NetworkService\AppData\
objShell.run "fbwfmgr /addexclusion C: ""\Windows\CCM\Logs"""
'Reboot to commit changes
objShell.run "shutdown -r"