re : C8000 workstation cannot power up (794 Views)
Reply
Super Advisor
Vincent_5
Posts: 370
Registered: ‎04-02-2000
Message 1 of 2 (794 Views)

re : C8000 workstation cannot power up

Hi Guys,
Can anyone advice, I have a c8000 workstation which I thought the power supply fail, but after changing it still cannot power up. The diagnostic led 3 is red . I can see burning mark on the cpu module , can anyone adive what does led 3 stand for. Please help.

Regards
Vincent
nothing is better than to know more
Please use plain text.
Honored Contributor
Andrew Rutter
Posts: 2,108
Registered: ‎07-03-2002
Message 2 of 2 (794 Views)

Re: re : C8000 workstation cannot power up

hi,

led 3 is the system board failure

see page 74/75 here

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00093136/c00093136.pdf

however if the cpu loks damaged it may need replacing also? where does it look burnt? have you removed it from the system already? or are you just talking about the colouration of the heatsink?

Andy

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation