10-24-2011 09:26 PM
I've replaced the the system board of the c8000 system, after replacing the sysytem board, powered-on the system it came to BCH, i tried to boot the system but its giving below error. Any suggestion would be helpfull.
WARNING: No graphics or serial consoles were found on this system.
The console has defaulted to the built in serial
port. The OS does not work with this console.
WARNING: No usable graphics console was found on this system.
may be that no graphics card is present, the graphics card>
is not functioning properly, or no USB keyboard is connected.
12-14-2011 05:44 AM
Your system says
"WARNING: No graphics or serial consoles were found on this system."
but you told
No graphics card installed in the system, no keyboard mouse is connected. but still facing the same problem.
Well, sounds OK. The system cannot find a card, if none is installed. Where is the problem?
You should set the console path in BCH to serial to avaiod the warning message.
Hope this helps!
There are only 10 types of people in the world -
those who understand binary, and those who don't.
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! star in the left column!