Re: c8000 + firegl X3 (866 Views)
Occasional Visitor
Posts: 2
Registered: ‎04-08-2011
Message 1 of 3 (866 Views)

c8000 + firegl X3

I got c8000 with damaged fire gl x1.
I decided to buy another one, but found x3 and bought it.
During bootup it hangs. Front led is blinking green, rear led no. 1 is on and green.
I used BCH to find the problem.
The last chasis code is:
I bought the card from guy using it in PC.
There is no monitor connected to card yet.
Firmware is 2.13
Keyboard and mouse is connected.
Without card in, system boots up with warning (no graphics) but works perfectly.

Could it be that:
- monitor has to connected ?
- there are different firegl x3s (for HP and PC) ?

For any help - thank you in advance.
Honored Contributor
Posts: 4,874
Registered: ‎09-20-2002
Message 2 of 3 (866 Views)

Re: c8000 + firegl X3

[ Edited ]


yes, fire gl for hp-ux ws seems to have a different BIOS.
See also:


*** Say 'Thanks' with Kudos ***
Occasional Visitor
Posts: 2
Registered: ‎04-08-2011
Message 3 of 3 (866 Views)

Re: c8000 + firegl X3

So that means that my card needs bios change.
Does anybody can help me and put right for c8000 bios for firegl x3 in the thread?

That would be really nice and helpful.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.