02-25-2011 09:24 AM
I was instructed to do the following but didn't help. What does the following do anyways?
Main Menu: Enter command or menu > co pa con serial_A.643
Console path: serial_A.643
Main Menu: Enter command or menu > ser chassiscodes off
Solved! Go to Solution.
02-27-2011 01:02 PM
I dont think you can turn the led off.
the workstation is designed to use a graphics card, and will show the error light you are seeing if it is missing.
What you have been asked to do, is just redirect the console output to a serial console(Terminal device)
Everytime you boot the workstation it will likely stop at BCH with a warning about no graphics card found. From here you MAYBE able to boot it, but something tells me it wont even boot without one installed?
03-03-2011 10:19 AM
Make sure you disconnect the USB keyboard and mouse.
Without keyboard, the system automatically uses the serial console, AFAIR.
Hope this helps!
There are only 10 types of people in the world -
those who understand binary, and those who don't.
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!