04-28-2000 02:31 AM - last edited on 03-11-2013 07:21 PM by Maiko-I
I am trying to connect a HP 18" LCD flatscreen display with a HP 9000
workstation model 712/100.
Although the resolution is set correctly the display intermittently "flashes"
to a blank screen. It is not a set frequency of flashes, but appears random in
The display and video cables are not faulty - I've tested them on an NT
Any ideas much appreciated.
P.S. This thread has been moved from Archived Desktops and Workstations Boards > general to Workstations - Itanium-Based, hp9000, Visualize - Hp Forums Moderator
05-01-2000 05:21 AM
B/C/Jxx00 models, as well as the X/P personal workstation models. The native
resolution of the display is 1280x1024 @ 75Hz. I don't have one of these
displays to test on a 712, but could you confirm (via BOOT_ADMIN) that your
resolution is set to this mode and not "sync-on-green"?
05-02-2000 01:52 AM
Thanks for rsponding.
I've interrupted the boot admin and allowed the system to cycle through many of
the monitor types - always seeing the same screen blanking.
I also manually set the monitor to the HP L1800 Monitor recommended resolution
of 1280x1024 @ 60Hz since this should is supported by the 712/100 - (monitor
I've tried many of the types including the obvious 1024x768 @ 75Hz.
I'm still seeing the screen blank for a second or so. It's almost as if it's
power related, but can't be since the monitor works fine on an NT client
(Omnibook 3000 laptop).
Any other ideas?
04-02-2002 06:20 AM
I have the exact same issue. Did you ever find a solution? Sorry I have to follow a thread that is 2 years old, but this is the only post turn out in the search.
03-24-2003 11:35 AM