02-05-2012 12:08 PM
I'm trying to install HPUX on a B180L machine. I have some experience with L3000 servers, where in order to install the OS, I just connect with the GSP via serial console, and follow the way to boot from installation media.
I would like to know if I can do the same to install the OS with the B180L workstation. This machine obviously hasn't a GSP, but could be accessed via serial port *before* HPUX is installed?
It happens that I haven't a monitor with the strange connector the B180L has.
Best regards and thank you very much in advance.
Solved! Go to Solution.
03-07-2012 07:37 AM
Sorry, but the links inside doesn't work anymore.
03-07-2012 11:11 AM
Hope this helps!
There are only 10 types of people in the world -
those who understand binary, and those who don't.
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
03-07-2012 01:51 PM
> It happens that I haven't a monitor with the strange connector the B180L has.
It might be useful to know that the strange connector is known as EVC. Only a mechanical adapter is required to connect a VGA display to it.
03-25-2012 07:50 PM
Hello Matti. Do you know what is the pinout connections for an EVC - VGA connector? Can't find one near to me, so I'll made it with used cables...
Thank you a lot!
03-26-2012 12:34 AM
From the Wikipedia link I posted, you can find this:
..and that page contains a link to the VGA connector pinout too. Just find the matching signals by name.