Re: Use icap processor from one partition to create a new partition in a same complex (209 Views)
Reply
Valued Contributor
gigiz
Posts: 335
Registered: ‎07-07-2002
Message 1 of 2 (245 Views)

Use icap processor from one partition to create a new partition in a same complex

Hi guys,

my costomer asked me to reduce a cell in Npar1  ad create a new npar2.

the problem is that my npar1 have 4 icap processor.

This is the scenario:

npar 1 have 6 cell  and i want reduce it by 4 cell. 

parstatus 

[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell0 active core 8/0/8 40.0/ 0.0 cab0,bay1,chassis3 yes yes 0
cab0,cell1 active base 8/0/8 40.0/ 0.0 - no yes 0
cab0,cell2 active base 8/0/8 40.0/ 0.0 cab0,bay0,chassis1 yes yes 0
cab0,cell3 active base 8/0/8 40.0/ 0.0 - no yes 0
cab0,cell4 active core 8/0/8 16.0/ 0.0 cab0,bay1,chassis1 yes yes 1
cab0,cell5 active base 8/0/8 16.0/ 0.0 - no yes 1
cab0,cell6 active base 8/0/8 16.0/ 0.0 cab0,bay0,chassis3 yes yes 1
cab0,cell7 active base 8/0/8 16.0/ 0.0 - no yes 1
cab1,cell0 absent - - - - - -
cab1,cell1 active base 8/0/8 16.0/ 0.0 - no yes 1
cab1,cell2 absent - - - - - -
cab1,cell3 active base 8/0/8 16.0/ 0.0 - no yes 1
cab1,cell4 absent - - - - - -
cab1,cell5 absent - - - - - -
cab1,cell6 absent - - - - - -
cab1,cell7 absent - - - - - -

 

Par # of # of I/O
Num Status Cells Chassis Core cell Partition Name (first 30 chars)
=== ============ ===== ======== ========== ===============================
0 active 4 2 cab0,cell0 barney
1 active 6 2 cab0,cell4 hp4-crm


Npar1 have this icap status:

Allocation of Instant Capacity Resources among the nPartitions
--------------------------------------------------------------
Intended Actual
nPar Total Active Active =======Inactive======= Runs
ID Cores Cores Cores Cores Memory Cells iCAP nPar Name
==== ===== ======== ====== ====================== ==== ======================
0 32 32 32 0 0.0 GB 0 Yes barney
1 48 44 44 4 0.0 GB 0 Yes hp4-crm (local)
N/A 0 N/A N/A N/A 0.0 GB 0 N/A Unassigned Cells


My icap processor are :

processor 21 6/15
processor 29 7/15
processor 37 9/15
processor 45 11/15

 

I must take 4 cell from npar1 and create npar2.(i take i/o chassis from another superdome)

Is it possible create a new npar whith this cell?

What appened with icap? is it a problem ? is it possible? how many processor i will have in my new

npar2.

 

Help me

 

Acclaimed Contributor
Torsten.
Posts: 23,449
Registered: ‎10-02-2001
Message 2 of 2 (209 Views)

Re: Use icap processor from one partition to create a new partition in a same complex

The output is a bit hard to read because of the font and format.

However, an icap cpu stays an icap cpu, so you can use 3 out of 4 cpus then or consider to activate the icap cpu first.

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.