Re: monitor not active on system start up (16 Views)
Reply
Trusted Contributor
lawrenzo
Posts: 383
Registered: ‎06-06-2003
Message 1 of 2 (16 Views)

monitor not active on system start up

Here's the story,

My hard drive became faulty so I replace it, on reboot my bios showed that I had lost 128 mb of memory - I removed 1 128mb memory dimm from the slot and my system would start but no output to the display.

I replace the good 128mb of memory but I still had the same issue. I bought brand new memory that is the same and I still have this problem - Have I blown the motherboard?

please help
hello
Please use plain text.
Valued Contributor
Michael Dillman
Posts: 373
Registered: ‎03-07-2003
Message 2 of 2 (16 Views)

Re: monitor not active on system start up

Try rebooting into safe mode (or vga mode) If you then have a display, go into display properties and on the settings tab set it to 600 x 800 and reboot. You should then be able to reset the display to what you like
If at first you don't succeed, you must be installing Windows
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation