Re: DL380p G8 RAID 1+0 (269 Views)
Reply
Occasional Advisor
HFMike
Posts: 9
Registered: ‎08-26-2013
Message 1 of 3 (289 Views)
Accepted Solution

DL380p G8 RAID 1+0

Hiya All,

New to these servers.

I'm trying to set up a Win 2008 Enterprise R2 Server

I'm going through the 'Intelligent Provisioning' to set this up

I set up my arrays as the guys want it

C:  RAID 1

D: RAID 1+0

E: RAID 1+0

F: RAID 0

 

Problem I have is that if I configure all the drives as above, using either Recommeded or Customized then setup always tries to install to D:

 

IF I configure only the array that will be C: and do the install, it works until I go and setup the rest of the arrays - once I boot up into Windows I get prompted to initialize the other drives and am faced with only RAID 0, 1, or 5

 

Am I going to have to download all the drivers into a separate USB and do a manual install ?

Occasional Advisor
HFMike
Posts: 9
Registered: ‎08-26-2013
Message 2 of 3 (278 Views)

Re: DL380p G8 RAID 1+0

Is this even possible?
Occasional Advisor
HFMike
Posts: 9
Registered: ‎08-26-2013
Message 3 of 3 (269 Views)

Re: DL380p G8 RAID 1+0

Nevermind

I was apparantly brain dead yesterday

 

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.