Cannot get virtualization to work in Win 7 Pro (ProDesk 490 G1 MT) (289 Views)
Reply
Occasional Collector
RabC
Posts: 1
Registered: ‎04-05-2014
Message 1 of 2 (289 Views)

Cannot get virtualization to work in Win 7 Pro (ProDesk 490 G1 MT)

Microsoft's hardware assisted virtualization detection tool tells me that HAV is not enabled on the PC (ProDesk 490 G1 MT) and I need to change the BIOS settings. I found the virtualization settings in the BIOS under System Security and enabled Virtualization Technology Vtx and Virtualization Technology Directed I/O (VTd). However, after closing down and restarting the PC (cold boot) and running the detection tool again, it still says HAV is not enabled . What am I missing? Do I need to change something else?

 

Thanks,

Rab

 

ProDesk 490 G1 MT

i74770 3.4 GHz (HAV capable)

4Gb memory

BIOS Lo2 v02.11

Win 7 Pro pre-installed (downgrade rights from Win 8.1)

Please use plain text.
Esteemed Contributor
Toffy
Posts: 647
Registered: ‎03-08-2013
Message 2 of 2 (276 Views)

Re: Cannot get virtualization to work in Win 7 Pro (ProDesk 490 G1 MT)

RabC

 

Start the System Push F10 for the Bios

Go to folder security

System Security enable VT

 

Page 143 http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c04033291-1.pdf

Say thanks by clicking the "Kudos! Star" which is on the left.


Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.






Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation