Re: Vlans across four switches (295 Views)
Reply
Occasional Advisor
Matthew Cutting
Posts: 6
Registered: ‎08-16-2009
Message 1 of 2 (324 Views)

Vlans across four switches

[ Edited ]

Have a 1810-48G switch that has 3 1810-24G switches connected to it via GBIC's fibre. I need to setup 5 vlans on these switches to create 5 different networks.

 

Looking at:

 

ID: 1 DEFAULT_VLAN

 20 Library

 30 Lighting 

 40 Sound 

 50 Guest

 

1810-24              1810-24              1801-48                      1810-24 

XXXX -  - - - - - - - XXXXX - - - - - -   XXXXXXX - - - - - - - - -XXXXX

sw1                       sw2                     sw3                               sw4

 

As mentioned, there need to be 5 vlans.  I need to make sure I get three vlans from sw1 to sw4. Is it just a matter of creating the vlans and allocating the ports to the vlans? Any other taggin having to be done?

 

Thanks,

 

Matt

Occasional Advisor
Matthew Cutting
Posts: 6
Registered: ‎08-16-2009
Message 2 of 2 (295 Views)

Re: Vlans across four switches

Does anyone have any idea? I have created the VLAN's but cannot ping from sw1 to sw4 with a vlan. Deafult vlan works fine. Does the GBICS automatically carry the vlans, or do these have to be tagged?

 

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.