V1910 Inter-VLAN Routing (2075 Views)
Reply
Occasional Visitor
Posts: 1
Registered: ‎02-25-2011
Message 1 of 1 (2,075 Views)

V1910 Inter-VLAN Routing

So the primary reason I bought a V1910 was so I could use the static routing on the switch to bypass the router. I just wanted to make sure I'm configuring everything correctly. I've got 3 switches, the V1910 is the "core" switch, the others are Linksys1 and Linksys2.

 

Router IP: 10.0.0.1

V1910 IP: 10.0.10.2

 

I have 4 VLANs on the V1910 with assigned IP addresses:

 

VLAN 10

IP: 10.0.10.1

 

VLAN 20

IP: 10.0.20.1

 

VLAN 40

IP: 10.0.40.1

 

VLAN 50

IP: 10.0.50.1

 

And I've configured the routes as:

 

Destination IP    Mask    Next Hop

0.0.0.0    0.0.0.0    10.0.0.1

10.0.20.0    255.255.255.0    10.0.10.3

10.0.50.0    255.255.255.0    10.0.10.4

 

 

Linksys1 is configured with:

Switch IP: 10.0.10.3

 

VLAN 20

IP: 10.0.20.2

 

Default route:

Destination IP    Mask        Next Hop

0.0.0.0    0.0.0.0.    10.0.10.2

 

 

Linksys2 is configured with:

Switch IP: 10.0.10.4

 

VLAN 50

IP: 10.0.50.2

 

Default route:

Destination IP    Mask        Next Hop

0.0.0.0    0.0.0.0.    10.0.10.2

 

Is that it? Will this work?

 

 

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.