Re: How to set up QoS (port based) for HP ProCurve 1810G - 24 GE (797 Views)
Reply
Collector
dan0el
Posts: 1
Registered: ‎07-10-2013
Message 1 of 2 (835 Views)

How to set up QoS (port based) for HP ProCurve 1810G - 24 GE

[ Edited ]

We are trying to set up QoS (port based or protocol based) on a HP ProCurve 1810G - 24 GE,

but so far have found no guides on how to do it. Does anyone have a guide on how to do this?

 

Thanks

 

 

P.S. This thread has been moved from ProCurve / ProVision-Based to web & unmanaged forum. - HP Forum Moderator

Trusted Contributor
Emil_Gogushev
Posts: 68
Registered: ‎09-06-2012
Message 2 of 2 (797 Views)

Re: How to set up QoS (port based) for HP ProCurve 1810G - 24 GE

Hello,

 

 

http://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.proc...

 

Please go to page 7-2 for port based priority

 

You have to go to VLANs > VLAN Ports >Port Priority

 

Port Priority

Specify the default 802.1p priority assigned to untagged packets arriving at the port. A value of

0 indicates the lowest priority, commonly used for routine traffic, and 7 indicates the highest

priority, often reserved for application such as voice and video. (0–7, default = 0)

 

As far as I know the switch should honor 802.1p priority set by end devices by default when it receives tagged traffic.

 

HTH

 

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.