HP V1910-24G Switch JE006A SNMP (827 Views)
Reply
Occasional Contributor
pilat322
Posts: 3
Registered: ‎02-13-2013
Message 1 of 1 (827 Views)

HP V1910-24G Switch JE006A SNMP

[ Edited ]

I have got problem with HP V1910-24G Switch JE006A.

I want to get mac table from device via snmp.
This information is available via web interface (Network->MAC).  But I need  to get the same info via snmpwalk.

I run ' snmpwalk -v 2c -c public $ip atPhysAddress'
but got info only for  DEFAULT_VLAN  interface (number 30) :

RFC1213-MIB::atPhysAddress.30.1.10.0.0.1 = Hex-STRING: 00 5F F4 32 80 92
RFC1213-MIB::atPhysAddress.30.1.10.0.0.3 = Hex-STRING: 40 1E 67 19 3E C6
RFC1213-MIB::atPhysAddress.30.1.10.0.0.4 = Hex-STRING: 00 67 19 26 56 91
RFC1213-MIB::atPhysAddress.30.1.10.0.0.5 = Hex-STRING: 00 61 86 00 16 05
RFC1213-MIB::atPhysAddress.30.1.10.0.0.7 = Hex-STRING: 40 0C 29 91 A5 86

 

How to get mac table for each interfaces (1-24) via snmpwalk? Thanks a lot.

 

Sofware version 5.20 Release 1111

 

 

 

P.S. this thread has been moved from ProCurve / ProVision-Based to Web and Unmanaged - Hp Forum Moderator

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.