Re: 1810-24G VLAN Question (237 Views)
Reply
Occasional Visitor
lesterd88
Posts: 2
Registered: ‎08-16-2013
Message 1 of 3 (262 Views)

1810-24G VLAN Question

Hi Everyone,

 

I need help understanding how to setup VLAN tagging to a few ports. What I need to do is allow two specific ports to pass the 802.1q tagging from our ESXi server so that VMs running on it can be in mulitple VLANs. I tried to just tag the ports in VLAN Management on the switch to all three VLANS (In this case 1, 10, and 20) but it isn't working. I did create a network in vmWare that tags its traffic with the correct VLAN (In this case, 10) but it will not ping. Any ideas?

 

Thanks!

Frequent Advisor
kkpro
Posts: 79
Registered: ‎01-26-2012
Message 2 of 3 (246 Views)

Re: 1810-24G VLAN Question

Hi. How many network cards you have in your ESXi server ?

Occasional Visitor
lesterd88
Posts: 2
Registered: ‎08-16-2013
Message 3 of 3 (237 Views)

Re: 1810-24G VLAN Question

I have 4 total. Two are connected to ports dedicated to the storage vlans. The other two are the ones I need to have access to both standard traffic and storage traffic vlans
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.