adding emc storage to HP3000 (156 Views)
Reply
Occasional Visitor
patelv3
Posts: 1
Registered: ‎05-08-2006
Message 1 of 2 (156 Views)

adding emc storage to HP3000

How do you add storage to a hp3000 running MPE. The storage has been allocated from a EMC storage fram via SCSI channel


Thanks in advance
Vinay
Valued Contributor
Glenn A. Mitchell
Posts: 73
Registered: ‎10-20-1996
Message 2 of 2 (156 Views)

Re: adding emc storage to HP3000

You treat EMC storage no differently than you would HP storage. If you connect the storage, you should be able to see it in ODE MAPPER. Configure it with a device type of SYMMETRIX.

You'll want to be sure your HVD card is at the minimum firmware revision required and that the Symmetrix disks are configured as sizes that are appropriate for the HP and your release of MPE.

See: http://jazz.external.hp.com/mpeha/papers/off_white_paper.html

Regards,

Glenn
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.