FLASH DISK DRIVE FIRMWARE (262 Views)
Reply
Trusted Contributor
Scott Hower
Posts: 127
Registered: ‎05-28-2001
Message 1 of 3 (262 Views)

FLASH DISK DRIVE FIRMWARE

We have an old box that is used for development...one of the 2GB drives went south. I dug up some old SCSI Seagate 4GB (ST15230N) drives that seem similar...I was able to format them using VOLUTIL on MPE. How can I upgrade the disk drive firmware to use these drives on my 9x8 6.5 PPIII MPE/iX box?
Please use plain text.
Honored Contributor
Chuck Ciesinski
Posts: 830
Registered: ‎10-03-2000
Message 2 of 3 (262 Views)

Re: FLASH DISK DRIVE FIRMWARE

Scott,

First thing to check is IODFAULT.PUB.SYS to see if the
required driver is installed on your system. If so, I believe that you should then be able to configure them in via sysgen. Are you sure that they are not ST15150W Seagates?

Not much help on this one.

Sorry,

Chuck Ciesinski
"Show me the $$$$$"
Please use plain text.
Trusted Contributor
Scott Hower
Posts: 127
Registered: ‎05-28-2001
Message 3 of 3 (262 Views)

Re: FLASH DISK DRIVE FIRMWARE

UPDATE: I was able to successfully mount the drives as members of my volume set. Right now I am restoring the system...it appears as if it may work without any further problems; will keep the thread posted.
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation