one vpar down (172 Views)
Reply
Frequent Advisor
tempsample
Posts: 100
Registered: ‎06-20-2013
Message 1 of 4 (172 Views)

one vpar down

OS version : v1

 

#vparstatus


[Virtual Partition]
                                                                          Boot
Virtual Partition Name         State Attributes Kernel Path               Opts
============================== ===== ========== ========================= =====
vpar1                         Up    Dyn,Auto   /stand/vmunix             -lq
vpar2                         Down  Dyn,Auto   /stand/vmunix             -lq

[Virtual Partition Resource Summary]
                                           CPU    Num        Memory (MB)
                                  CPU     Bound/   IO   # Ranges/
Virtual Partition Name          Min/Max  Unbound  devs  Total MB    Total MB
==============================  ================  ====  ====================
vpar1                            2/  5    2   0     7    0/  0         4096
vpar2                            2/  5    2   0    10    0/  0            0


----------------------------------------------------

 #vparstatus -v


[Virtual Partition Details]
Name:         vpar1
State:        Up
Attributes:   Dynamic,Autoboot
Kernel Path:  /stand/vmunix
Boot Opts:    -lq

[CPU Details]
Min/Max:  2/5
Bound by User [Path]:  0.11
                       0.12
Bound by Monitor [Path]:
Unbound [Path]:

[IO Details]
   0.0.0
   0.0.8
   0.0.0.3.0.6.0.0.0.0.0
   0.0.0.3.0.5.0
   0.0.0.3.0.5.0.0.0.0.0  BOOT
   0.0.0.3.0.6.0  ALTBOOT

[Memory Details]
Specified [Base  /Range]:
          (bytes) (MB)
Total Memory (MB):  4096
[Virtual Partition Details]
Name:         vpar2
State:        Down
Attributes:   Dynamic,Autoboot
Kernel Path:  /stand/vmunix
Boot Opts:    -lq

[CPU Details]
Min/Max:  2/5
Bound by User [Path]:  0.13
Bound by Monitor [Path]:  0.10
Unbound [Path]:

[IO Details]
   0.0.10
   0.0.10.0.0.4.0
   0.0.10.0.0.4.0.12.0.0.0.0.0
   0.0.10.0.0.4.0.14.0.0.0.0.0
   0.0.10.0.0.4.0.10.0.0.0.0.0
   0.0.10.0.0.4.0.8.0.0.0.0.0

[Memory Details]
Specified [Base  /Range]:
          (bytes) (MB)
Total Memory (MB):  0

-------------------------------------


from vparstatus -v , I am not able to see boot and altboot set.

when I try to boot from vpar1,

#vparboot -p vpar2


vparboot: Booting vpar2.  Please wait...
vparboot unable to boot vpar2: no primary boot device.

What should be done to up the vpar2?

Please use plain text.
Honored Contributor
Patrick Wallek
Posts: 13,752
Registered: ‎06-21-2000
Message 2 of 4 (162 Views)

Re: one vpar down

Do you have any configuration information from a time when the vPar was working normally?  If so, check it and see what the boot disks were defined as.  You can then use vparmodify to set the BOOT and ALTBOOT disks.

 

If this is an itanium server another option is to use the command:

 

vparload -p vpar2 -E 0

 

from the MON> prompt.

 

Please use plain text.
Frequent Advisor
tempsample
Posts: 100
Registered: ‎06-20-2013
Message 3 of 4 (156 Views)

Re: one vpar down

HI,

 

 

I don't have any old configuration information.

 

Server model is not itanium.

 

HP-UX B.11.11 U 9000/800 3007694258 unlimited-user license

 

model
9000/800/rp7410

 

what could be the next step ?

Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 23,253
Registered: ‎10-02-2001
Message 4 of 4 (130 Views)

Re: one vpar down

Looks like vpar2 has no memory assigned.


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation