Remove vPar Error (204 Views)
Reply
Occasional Contributor
Cdiaz
Posts: 6
Registered: ‎06-29-2011
Message 1 of 4 (204 Views)

Remove vPar Error

How can I remove a vPar?

I have a nPar with 2 vPars:
vPar1 = 11.23
vPar2 = 11.31

I have to remove the vPar2 but I get the following error:
# parremove –p vPar2

vparremove: Error: Command version 1.4 is incompatible with monitor version 1.50

How can I remove this vPar???

cdiasan
Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 23,252
Registered: ‎10-02-2001
Message 2 of 4 (172 Views)

Re: Remove vPar Error

[ Edited ]

You need to try this with the 11.31 command set, the 11.23 command set cannot do this.

 

After this you need to boot the vpmon from the 11.23 partition.


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
Occasional Contributor
Cdiaz
Posts: 6
Registered: ‎06-29-2011
Message 3 of 4 (165 Views)

Re: Remove vPar Error

Do not understand what you explain more.
How do I delete a partition from which I located and is active??.

vpar2 # vparremove-p vpar2 (this can be done).

How do I boot from vpar1 vpmon (11.23)?

 

Regards

cdiasan
Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 23,252
Registered: ‎10-02-2001
Message 4 of 4 (159 Views)

Re: Remove vPar Error

IMHO you have 2 options:

 

1) boot from the 11.23 vpmon and try from there (reboot system and boot from the 11.23 boot disk /stand/vpmon)

 

2) boot 11.31 in nPar mode and remove the vPar.

 

 

I'm not sure if the 11.23 vpmon can use the vpdb created with the 11.31 version. If not, consider to re-create the 11.23 vPar using the 11.23 command set.


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation