Re: Installing HP-UX on new VM (6.2) from March 2013 media fails (1153 Views)
Reply
Advisor
Paul Haygarth
Posts: 20
Registered: ‎12-03-2001
Message 1 of 11 (1,950 Views)
Accepted Solution

Installing HP-UX on new VM (6.2) from March 2013 media fails

Has anyone had success loading a new HP-UX OS from the March 2013 media, on to a VM?

 

The VSP is was just installed with the March 2013 media.  I created a brand new VM and when I add either the ISO file or the DVD as storage, I am able to boot from it, but once I select 'Install HP-UX', I get the following Ignite error:

 

       * Checking configuration for consistency...

NOTE:    run_cmd: Process: 120 (net_cfg_prep): killed by signal: 11.

ERROR:   Could not open /tmp/env.vars: No such file or directory (errno = 2).

ERROR:   Could not execute net_cfg_prep

NOTE:    System rebooting...

Shutdown at 14:37 (in 0 minutes)

 

 

I was able to successfully load from the September 2011 media onto the VM.

 

Any insight would be appreciated.

Please use plain text.
Respected Contributor
Stan_M
Posts: 92
Registered: ‎09-12-2011
Message 2 of 11 (1,894 Views)

Re: Installing HP-UX on new VM (6.2) from March 2013 media fails

Yes, unfortunately there is an Ignite/UX bug in 11.31.1303 media.

 

The only workaround at the moment is to install the guests using Ignite server.

 

HTH

Stan

Please use plain text.
Frequent Advisor
Cresswell Williams
Posts: 103
Registered: ‎01-09-2008
Message 3 of 11 (1,687 Views)

Re: Installing HP-UX on new VM (6.2) from March 2013 media fails

Hi All

 

I have the exact same problem. Has this bug been fixed with a patch yet?

 

Thanks

Please use plain text.
Respected Contributor
Stan_M
Posts: 92
Registered: ‎09-12-2011
Message 4 of 11 (1,684 Views)

Re: Installing HP-UX on new VM (6.2) from March 2013 media fails

ISO images with new Ignite/UX version which includes the fix are available thru HP support.

Stan

Please use plain text.
Frequent Advisor
Cresswell Williams
Posts: 103
Registered: ‎01-09-2008
Message 5 of 11 (1,677 Views)

Re: Installing HP-UX on new VM (6.2) from March 2013 media fails

Thanks Stan

 

I believe it is on the latest Ignite-UX:

swlist -l product | grep -i Ignite
Ignite-UX             C.7.16.283     HP-UX System Installation Services

 

Is booting from ISO installation still supported, as most forums point to the Ignite Server installation, which is a more cumbersome installation compared to booting from iso.

 

Please use plain text.
Respected Contributor
Stan_M
Posts: 92
Registered: ‎09-12-2011
Message 6 of 11 (1,673 Views)

Re: Installing HP-UX on new VM (6.2) from March 2013 media fails

The fixed media use newer Ignite version with the necessary fix (7.16.500) which is not yet available elsewhere.

Both methods are supported, nothing has changed, except that there was this bug in Ignite which caused problems when installing from ISO image and which had the network installation as a workaround.

 

Stan

Please use plain text.
Occasional Visitor
Daniel569372
Posts: 2
Registered: ‎08-09-2013
Message 7 of 11 (1,398 Views)

Re: Installing HP-UX on new VM (6.2) from March 2013 media fails

Are you sure that "fixed" ISOs have been released?  I had the same problem with the March 2013 VSOE media, so yesterday I went to the electronic fulfullment website and downloaded the March 2013 VSOE ISOs from there (that's the latest they have listed), and I'm still seeing the same problem.

 

Please use plain text.
Respected Contributor
Stan_M
Posts: 92
Registered: ‎09-12-2011
Message 8 of 11 (1,393 Views)

Re: Installing HP-UX on new VM (6.2) from March 2013 media fails

Get them thru HP support.

Please use plain text.
Occasional Visitor
Daniel569372
Posts: 2
Registered: ‎08-09-2013
Message 9 of 11 (1,387 Views)

Re: Installing HP-UX on new VM (6.2) from March 2013 media fails

That worked.  Thanks!

Please use plain text.
Occasional Visitor
j129L
Posts: 1
Registered: ‎09-11-2013
Message 10 of 11 (1,155 Views)

Re: Installing HP-UX on new VM (6.2) from March 2013 media fails

Can't seem to find the version (7.16.500), that you speak of on HP Support. From what is available under electronic downloads, only version (7.16.283) exists. Please paste me the link if possible. Thanks!
Please use plain text.
Respected Contributor
Stan_M
Posts: 92
Registered: ‎09-12-2011
Message 11 of 11 (1,153 Views)

Re: Installing HP-UX on new VM (6.2) from March 2013 media fails

The advice was not to search HP support center website, but to call HP support. I do not think

the updated version is available on the web.

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation