05-07-2014 11:40 PM
Hope this helps!
There are only 10 types of people in the world -
those who understand binary, and those who don't.
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
05-12-2014 05:03 AM
VSP should be a physical server, In HP-UX and many more hypervisors. Since we are talking about HP-Ux it should be Rx server or RP server or Itenium blade.
To create Vpar
#vparcreate –P <vparname> -a memory:4G –a cpu:3
You can edit existing vpar using
See the status
Adding disk you you can straight away add disk path or if it is fiber or SCSI you can add the path of the card
To disk and network you have to add as “avio” devices.
#vparmodify –P <vparname> -m disk:avio_stor::disk:/dev/rdisk/disk20
You may need to create vswitches
#vparnet –c –S vslan1 –n 1 (only the ppa number is used to indicate the lan)
Start & stop the switch:
#vparnet –b –S vslan1
#vparnet –h -S vslan1
To show vswitch status
#vparnet –S vslan1
Add port to vpar
# vparmodify -P <vparname> -a network:avio_lan::vswitch:vslan1:portid:2
reffer the attached doument you can download more in internet will give you more information
Best regards and good luck