05-01-2013 05:49 PM
I inherited a VCX phone system and I am not finding it very intuitive, and unfortunately I'm going in blind without someone to show me the ropes. I've managed to find some of the various components, but not everything I am looking for. We had an HP contract that expired mid-april, prior the expiration I contacted support but they were pretty much useless in being able to provide answers. I'd really appreciate it if someone could point me to where it is I'd be forver greatful and treat you to a coffee if I ever run into you.
07-01-2013 12:20 PM
iIf you are still having issues and need some help, please reach out to me. I can show you how to make these basic Admin changes. email@example.com
08-21-2013 07:04 AM
Incoming translations are usually done on the media gateway. If you take a look at yor "Route Plans List" (Directory/Route Pans/Route Plans), you should see a line with the 9* pattern (assuming you use a 9 for an outside line). Make a note of the Route listed to the left and navigate to "Routes" on the tab at the top of the page. Once there find the route from the previous section and click on "Endpoint". This will show you your external gateway address. All you will need to do then is to navigate to the gateway via http and look at the translations on the gateway, you will probably be looking for "Dest Number TEL - > IP". Do not be suprised if you only see translations for the last 4 or 6 digits as many telcos will only present those digits to customer equipment.
09-20-2013 07:27 AM
Sites will sometimes decouple an inbound DID and internal extension to control access from an external caller. Think a classroom at a school.