04-25-2011 07:26 AM
So we swapped over from a 3com NBX to the new VCX 9.5 system now. Everything is working fine except I cannot figure out how to get voicemails going to email. Wasn't sure where I needed to setup our exchange server information to make this work. Any help would be appreciated.
05-11-2011 09:30 AM
What needs to be done is to enable E-Mail Autodelivery on the mailboxes that need this capability, and specify what email address to send the voicemail messages to. This is done in the Delivery Options of the mailbox in the IP Messaging Web Interface.
By default, the VCX will use the configured DNS servers to look up the mail-exchanger that serves the domain to which the emails are being sent. The VCX then directly connects to the mail-exchanger using SMTP on port 25, so any firewalls between the VCX and the mail-exchanger should be configured to allow outbound SMTP traffic from the VCX to the mail-exchanger.
If the above information doesn't help to get voicemail to email working, please open a case with Technical Support.
05-11-2011 12:25 PM
Well I got it working thanks for the help. Only issue now is it is going into junk and since it doesn't come from a actual address gotta figure out how to fix that.
06-14-2011 10:16 AM
We Recently changed our E-mail Server on site.
I worked with Technical support and thought we had addressed changing the Email server IP address within Cygwin.
Today I found the same setting on the Web based interface...
But, our Messages are not being forwarded to our E-mail.
06-15-2011 07:07 AM
You could try removing the SMTP (Email) Server from the Cygwin or Web interface, save the changes, add it back in, and save the changes again.
If voicemails are still not being delivered via email, then the next step would be to collect the eml_client.out log from the /opt/logs/ipm/app directory. If you look at the log, it should give you an idea of what server the VCX is trying to send mail to, and how that server is responding to the VCX.
If you need help interpreting that log, then you should open a case with Technical Support.