Telephone Interface to P.A. (374 Views)
Reply
Occasional Contributor
KnoxPhoneMan
Posts: 7
Registered: ‎01-21-2013
Message 1 of 2 (374 Views)
Accepted Solution

Telephone Interface to P.A.

I understand that to interface the VCX to a P.A. such as that used in schools one has to use a Line Isolation Transformer connected to a FXS. Can anyone recommend a Line Isolator or interface device that has successfully connected the VCX to a PA? I would be interested to know how this has been done by others and what devices they have used.

Occasional Contributor
hermimi2
Posts: 6
Registered: ‎02-21-2013
Message 2 of 2 (331 Views)

Re: Telephone Interface to P.A.

We have our Telecor PA system going through our FXS. It works great. Create a phone extension in the VCX for the PA system. In the gateway assign the extension to the channel you are going to use. Plug an analog phone line into the gateway channel and into the card on the paging system.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.