Re: IPM 7.1 changing IP and NTP address (147 Views)
Reply
Occasional Contributor
CvilleTech
Posts: 4
Registered: ‎09-20-2011
Message 1 of 5 (167 Views)

IPM 7.1 changing IP and NTP address

Can anyone tell me the correct way to change the NTP and I might have to change IP address on IPM due to network re-configure.

 

Thanks

stephen

 

 

Please use plain text.
Valued Contributor
Justin_Goldberg
Posts: 160
Registered: ‎03-16-2011
Message 2 of 5 (164 Views)

Re: IPM 7.1 changing IP and NTP address

[ Edited ]

Be careful. There's something weird with vcx enterprise where the vcx-configure and/or vcx-reconfigure scripts only work on one or the other. Can't remember exactly, I've only heard it secondhand.

Please use plain text.
Advisor
jwhitley
Posts: 10
Registered: ‎07-23-2010
Message 3 of 5 (153 Views)

Re: IPM 7.1 changing IP and NTP address

How many servers on your VCX? You mention V7.1, so I assume it's VCX Enterprise.

The NTP change is easy - just user vcx-config-network.

If you need to change the IP of the IPM server, you need to run vcx-reconfigure on any VCX server that references it. Also don't forget to change endpoint IP addresses in Directory > Endpoints as these wont be changed automatically.
Please use plain text.
Occasional Contributor
CvilleTech
Posts: 4
Registered: ‎09-20-2011
Message 4 of 5 (152 Views)

Re: IPM 7.1 changing IP and NTP address

Just 1 IP messaging server, with multiple NBX system running SIP. I know I need to for sure change the NTP address, with the strong possibility of changing the actual IP address on IPM in the very near future. I had never had to change any address on a VCX or IPM server so do not know the proper procedure.

 

Thanks for any help.

Please use plain text.
Advisor
jwhitley
Posts: 10
Registered: ‎07-23-2010
Message 5 of 5 (147 Views)

Re: IPM 7.1 changing IP and NTP address

If it's an NBX running SIP using VCX IPM rather than a full blown VCX system then it should be pretty straightforward. NTP is as I've already mentioned. IP change on the IPM server simply run vcx-reconfigure.

 

You'll also need to tell the NBX the new IP of its voicemail system.

 

VCX can be much trickier. We often use an IP change as the reason for a full reinstall / upgrade.

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation