UFT can't identify object on Firebox and Chrome. (1188 Views)
Reply
Occasional Contributor
Haisenberg
Posts: 4
Registered: ‎10-15-2013
Message 1 of 3 (1,188 Views)
Accepted Solution

UFT can't identify object on Firebox and Chrome.

I installed uft 11.50 and the following patchs as below:

UFT_00001,UFTALM_00001,UFT_00037,UFT_00022,UFT_00056

and right now my uft version is 11.51 bulid 0561

As the patch UFT_00056 says, it will support chrome 27,28 and 29 beta; firefox 22 and 23 beta

But it not work for me, the uft can't identify the chrome and firefox as a brower, even I used the lower version of the chrome(21,26) or firefox(20,21). the object spy always identify chrome and firefox as a window.

 

Could anybody give me some advice and help me out? Thank you very much!

Please use plain text.
Senior Member
ivan_p
Posts: 3
Registered: ‎02-20-2012
Message 2 of 3 (1,168 Views)

Re: UFT can't identify object on Firebox and Chrome.

Hi ,

 

If UFT is able to Internet Explorer as a browser, most probably the UFT extension/plugin for Chrome and Firefox are not enabled.

In order to check this, start Firefox/Chrome as administrator, open Settings->Extensions and make sure the 'Unified Functional Testing Agent/Plugin' is enabled.

Also, please make sure that UFT is not configured to Record and Run on specific browsers only; in UFT menu go to Record -> Record and Run Settings and select the option 'Record and Run on all browsers'

 

Cheers!

Please use plain text.
Occasional Contributor
Haisenberg
Posts: 4
Registered: ‎10-15-2013
Message 3 of 3 (1,163 Views)

Re: UFT can't identify object on Firebox and Chrome.

Thank you so much, you save MY LIFE!!! IT WORKS NOW!!!
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation