Re: UFT 11.5 Validating License... (4097 Views)
Reply
Occasional Contributor
Byzoor
Posts: 6
Registered: ‎06-27-2011
Message 1 of 14 (5,500 Views)

UFT 11.5 Validating License...

Validating_License.jpgHi,

i install UFT 11.5 Demo version for 30 days. While i open the UFT 11.5 i am getting  message Validating License...and followed by Windows message. PFA.

OS: Windows 7 32 bit

 

As per HP User installation guid i remove the  License server Environment variable.

Kindly advise me, Thanks in advance,

 

Regards,

Byzoor,

 

Happy Tester,
Byzoor,
Super Advisor
csm2mk
Posts: 216
Registered: ‎02-08-2013
Message 2 of 14 (5,493 Views)

Re: UFT 11.5 Validating License...

This was happening to me, knowing for sure that my license and my license server were correct.

 

I´ve installed 11.51 (back then) and it was fixed.

 

Obviously now you have 11.52 so try that.

 

Cheers.

Super Advisor
csm2mk
Posts: 216
Registered: ‎02-08-2013
Message 3 of 14 (5,491 Views)

Re: UFT 11.5 Validating License...

Ups, I am sorry, just saw you had a demo...

 

Please ignore my answer.

 

Apologies.

Regular Advisor
HaiTNguyen
Posts: 105
Registered: ‎11-29-2011
Message 4 of 14 (5,466 Views)

Re: UFT 11.5 Validating License...

Hi Byzoor,

For your issue, do you see it all the time you launch UFT 11.50? Could you check Event Viewer log to see what is wrong?
Regular Advisor
AnkurJain
Posts: 84
Registered: ‎06-05-2013
Message 5 of 14 (5,455 Views)

Re: UFT 11.5 Validating License...

It should not show "Validating License" if you're on demo version ... check this video. You should cllick on Continue and not install license (many people new tp QTP make this mistake)

 

 

------------------------------------------------------------
Please make sure to "Kudos" on the left and mark the thread as resolved if this has answered your query.
------------------------------------------------------------
Occasional Contributor
Byzoor
Posts: 6
Registered: ‎06-27-2011
Message 6 of 14 (5,443 Views)

Re: UFT 11.5 Validating License...

Eventhough i uncheked the 'Run License Wizard, i am facing this issue,

 

In Event Log:

 

Faulting application name: UFT.exe, version: 11.50.3070.0, time stamp: 0x50abb6f2

Faulting module name: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b83b16

Exception code: 0xe0434352

Fault offset: 0x0000812f

Faulting process id: 0x10e4

Faulting application start time: 0x01ce70d8c758798a

Faulting application path: C:\Program Files\HP\Unified Functional Testing\bin\UFT.exe

Faulting module path: C:\Windows\system32\KERNELBASE.dll

Report Id: 068b5bdc-dccc-11e2-8aa9-00188b61dd76

 

 

Happy Tester,
Byzoor,
Advisor
Schlaupitz
Posts: 18
Registered: ‎08-05-2001
Message 7 of 14 (5,395 Views)

Re: UFT 11.5 Validating License...

[ Edited ]

Hi, I have exactly the same Problem.After applying the permanat license, the application will not launch anymore.

 

Faulting application name: UFT.exe, version: 11.52.778.0, time stamp: 0x51ab5a47

Faulting module name: KERNELBASE.dll, version: 6.1.7601.17965, time stamp: 0x506dbd3f

Exception code: 0xe0434352

Fault offset: 0x0000c6e3

Faulting process id: 0x2794

Faulting application start time: 0x01ce7be435343bec

Faulting application path: C:\Program Files\HP\Unified Functional Testing\bin\UFT.exe

Faulting module path: C:\Windows\system32\KERNELBASE.dll

Report Id: 7a4950ae-e7d7-11e2-8264-0026b9d060dd

 

 

Occasional Visitor
Bary
Posts: 1
Registered: ‎12-04-2013
Message 8 of 14 (4,992 Views)

Re: UFT 11.5 Validating License...

Anyone got a solution on this? I'm having exact same problem as Schlaupitz and i'm running on windows 7 32-bit machines (both desktop & laptops). I couldn't find any solution in HP's support site. Its so depressing now.

Occasional Visitor
UFTAutomator
Posts: 1
Registered: ‎12-27-2013
Message 9 of 14 (4,826 Views)

Re: UFT 11.5 Validating License...

Does anyone has a solution for this. I am also facing the same issue. I am using HP UFT 11.50 with Windows 7 64 bit. Does the latest patch 11.51 or higher might have a solution for the problem?

HP Expert
Ana_Noncheva
Posts: 245
Registered: ‎08-06-2013
Message 10 of 14 (4,797 Views)

Re: UFT 11.5 Validating License...

Hello,

 

Please try to start UFT with full admin rights as well as UAC & DEP disbaled. This is to check if problem is related to unsufficient permissions.

If this does not help, try repairing it from Control Panel. Again, with full admin rights and UAC & DEP disabled (this is very important!)

Also, download and install latest UFT updates (SP3 currently): http://support.openview.hp.com/selfsolve/document/KM00356819

 

Btw, is your license Concurrent or Seat?

 

Regards,

Ana

“HP Support
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.”
Occasional Visitor
ganesan2
Posts: 2
Registered: ‎03-12-2014
Message 11 of 14 (4,162 Views)

Re: UFT 11.5 Validating License...

[ Edited ]

Hi all,

 

We are facing the same issue. i have been following this Forum before installing, tried installing twice, thrice, We did UFT 11.53 upgrade as well.But No go. PFA. we are using concurrent license which is activated successfully. .Any help would be appreciated. 

 

 

 

Best Regards,

Ganesan.

 

Respected Contributor
dcampregher
Posts: 216
Registered: ‎07-07-2011
Message 12 of 14 (4,104 Views)

Re: UFT 11.5 Validating License...

HI,

I have a problem with the installation of UFT 11.50. After download mídia for the Seat licenses ( Software_HP_UFT_11.50_English_T6510-15080 ) and run the installation the UFT, was installed in Concurrent mode. But the mídia is a Seat mode.

 

I run the License Wizard but don't appear the option to change to Seat License.

 

Any idea why this behavior ?

 

Diogo

-----------
Please assign Kudos
Advisor
peenky100
Posts: 33
Registered: ‎06-07-2013
Message 13 of 14 (4,097 Views)

Re: UFT 11.5 Validating License...

I have co-worker and she had that issue, uninstalled and re-installed a quite a few times but issue still exist, opened up a Ticket with HP and didn’t resolve this issue. She ended up getting a new laptop. Installation on new laptop worked fine and able to access the UFT without any issue. So I suspect something to do with the configuration :)

 

For the changing the concurrent license to seat license or wise versa, you can try going here:

C:\Program Files\HP\Unified Functional Testing\bin

 

 

 

Occasional Visitor
ganesan2
Posts: 2
Registered: ‎03-12-2014
Message 14 of 14 (3,936 Views)

Re: UFT 11.5 Validating License...

[ Edited ]

Hi All,

 

 We have found the solution for "HP UFT 11.5 has stopped working while validating license" after some significant efforts on the problem.  I have attached the  solution for your reference. PFA... This problem is very similar to HP vugen 11.5 ".net framwork error". Using this solution, we can resolve both the error.. 

 

1. Go to C:\windows\temp\

2. find there is a file name:  HP_Unified_Functional_Testing_11.50_RegistrationFailure

3. copy paste the file into Desktop.

4. open the file using notepad.

5. copy the content of notepad into WORD and delete  ERROR ON COMMAND: using find and Replace option.

6. Replace the command Syswow64 to System32.

7. Now copy the content of WORD to notepad again.

8. Save the notepad as .bat file .

9. Run the bat file. 

10. Now open the HP UFT 11.5, It should work fine without any error.

 

I have given graphical explanation in the attached document. 

 

 

 Best Regards,

Ganesan.

 

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.