12-15-2013 10:58 PM - last edited on 12-22-2013 06:30 PM by Maiko-I
My internet explorer is updated from 10 to 11, now the actions performed on the IE 11 is not recorded in QTP 10. Can any one guide me in this regard whether it requires patching or any other solution................
P.S. This thread has been moved from Quality Center Support and News Forum to Unified Functional Testing (formerly QTP) News and Support Forum. - Hp Forum Moderator
12-16-2013 04:30 AM
To my knowledge QTP10 does not support neither IE10, nor IE11. Also, QTP10 is no longer supported so there is no patch which add support for these versions of IE. I would advise you to either upgrade to the latest version of QTP (UFT11.5) or try launching IE10 in IE8 compatibility mode.
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
12-19-2013 09:23 AM
According to the QTP 10 Product Availability Matrix, IE 8 is the latest supported version.
(Opinions expressed in my postings are mine alone, and do not reflect the opinions of my employer.No warranties express or implied for any solution/suggestion posted.)
12-23-2013 07:29 PM
You have to look in to Product Availability Matrix that came with QTP10 to see what version of IE is supported. IE9 is unlikely to be supported in QTP10. It is supported in QTP11.
02-05-2015 12:21 AM
there's a work around for this.
1. Copy the url
2. Open New tab
3. Paste the url
4. Close the tab where you copied the url
Or if the object isn't detected yet by QTP, you can manually enter the X and Y coordinates of the object.
However, this is not working in all pc.
Do you have any work arounds to suggest aside from this?