MPE DTC terminal (225 Views)
Reply
Occasional Visitor
Partsch
Posts: 3
Registered: ‎11-03-2003
Message 1 of 5 (225 Views)
Accepted Solution

MPE DTC terminal

Can I use my current DTC terminals (100 pieces) after transition to HP-UX platform?
Honored Contributor
Kwan Fong, Emile
Posts: 1,162
Registered: ‎07-10-2000
Message 2 of 5 (225 Views)

Re: MPE DTC terminal

Hello Partsch,

Yes DTCs are also supported on HP-UX. What are the DTCs models?
King is the customer!
Occasional Visitor
Partsch
Posts: 3
Registered: ‎11-03-2003
Message 3 of 5 (225 Views)

Re: MPE DTC terminal

DTC72MX...
Is your answer YES - OS ver. dependant (UX 10.x, 11.xx)? We have all 100 terminal connected to MPE 6.5 on 969KS/120 now and we plant to transit to UX RP server XXXX. Thanks for answer...
Honored Contributor
Kwan Fong, Emile
Posts: 1,162
Registered: ‎07-10-2000
Message 4 of 5 (225 Views)

Re: MPE DTC terminal

Hello Partsch,

Yes DTC72MX is supported on HP-UX. Software wise, all DTCs are supported through HP-UX 11.11. Hardware wise, be aware some DTCs (DTC16, DTC48, DTC16TN) are obsolete.
King is the customer!
Honored Contributor
Kwan Fong, Emile
Posts: 1,162
Registered: ‎07-10-2000
Message 5 of 5 (225 Views)

Re: MPE DTC terminal

Hello Partsch,

On HP-UX, the DTCs can be managed either PC-Based or Host-Based like on MPE.

If PC-Based, minimum OV/DTCMGR version 14.0 is required.

If Host-Based, minimum DTC Manager/UX versions A.14.3A on HPUX 10.20, A.14.4J on HP-UX 11.x are required.
King is the customer!
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.