04-05-2003 09:37 PM
I work on a HP3000/918 with MPE/ix 6.0 and I want to connect it to a PC where I want to install Reflection. I have an idea on the NS configuration in NMMGR, but how to make the hardware connection between the PC and the HP3000 ? Must I use a card network on the PC or is a COM port sufficient ? The connection on the HP is through the DTC (RJ45) ?
In this case can I specify an IP address in the HP?
04-07-2003 04:56 AM
There are 2 ways to connect your PC running Reflection:
1) PC connected to the network (PC requiring a lan card)
2) PC connected the DTC (using PC serial COM port)
06-09-2003 03:22 PM
You need to installed Reflection on your PC so you can access the HP3000 system. As for the PING command, it will work as long as your PC is configure to access the network. You do not require reflection to execute the PING command. (what OS platfrom are you running on your PC?)
06-10-2003 10:04 AM
There is another terminal emulator available called QCTerm which is available from aics.
You can download from the site below.
A number of the 3000-L listers utilize this product. You can search the archives of the 3000-L at ( watch the wrap).
06-10-2003 10:55 AM
06-13-2003 01:23 PM
The better way to connect the two machines is
via network (yes RJ45)
That will give you fast connection not like COM
Check the connection between them with ping install the reflection and have fun.
Specify the ip on hp with ifconfig
01-18-2004 05:55 PM
And now what I want is to connect my HP3000 network to a local network (PCs), where the server IBM Netfinity-3500 and the clients PCs are connected with a HUB.