Ultrium 920 LTO-3 SCSI fails LTT 4.16 Installation test with Sense Key 0x05 error (314 Views)
Reply
Occasional Contributor
Erik Sørensen
Posts: 3
Registered: ‎05-25-2006
Message 1 of 1 (314 Views)

Ultrium 920 LTO-3 SCSI fails LTT 4.16 Installation test with Sense Key 0x05 error

Hi all,

While our Ultrium-3 SCSI (latest firmware on WinSrv2008SP2&/x64(D22D/Standalone) according to LTT) seems to work without errors - but rather slow! - during daily operations, we are stuck in our efforts to improve performance by the following errors in HP Library and Tape Tools (6.0):

 

1) "Installation check" gets unresponsive in "Drive Cooling\File system characteristics on local disks allow optimum performance" with the message: "Sense Key 0x05, Sense Code 0x2600 (Operator selected invalid field in parameter list)".

 

2) The LTT Test "LTO Drive Assessment" refuses to execute with obviously misleading error messages: “The cartridge currently loaded in the drive is write protected.”, “This test cannot be performed on a write protected cartridge.” and “This test cannot be performed on a write protected cartridge.” 

 

LTT Firmware, Health, Dev Perf, Sys Perf as well as other Test Groups however report everything to be OK.

 

I attach the LTT log-files from C:\Program Files (x86)\Hewlett-Packard\HP Library and Tape Tools\logs and hope that someone have a good idea or advise to help us out.

 

Kind regards

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.