Re: MSL6060 Cabling (224 Views)
Reply
Regular Advisor
Sharjeel Saleem
Posts: 154
Registered: ‎06-25-2006
Message 1 of 2 (234 Views)

MSL6060 Cabling

Hi All,

 

We have 2 LTO3 drives installed with 1 NSR, we are planning to add 2 more tape drives (LTO3/4) in our MSL6060 tape library.

Can any one send us the options reagrding connectivity of 4 tape drives in MSL6060 so we can order upgrade.

 

Br, sharjeel

Trusted Contributor
Thomas Martin
Posts: 62
Registered: ‎09-27-2001
Message 2 of 2 (224 Views)

Re: MSL6060 Cabling

Hello,

 

you need the following parts:

1x AD577A  HP e1200-320 4Gb Fibre Channel Interface Card

2x AD612B  HP MSL6000 LTO-3 Ultrium 960 Drive

or

2x AJ028A HP MSL6000 LTO-4 Ultrium 1840 Tape Drive

 

Place the parts like the other drives and NSR into the free slot of the library. Check Firmware, update FW of all parts to the same level.

 

But the MSL6000 is retired June 2011, so these parts could be very expensive.

 

Thomas

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.