HP L&TT version 4.9 (279 Views)
Reply
Occasional Visitor
Aldrin Teo
Posts: 3
Registered: ‎01-24-2010
Message 1 of 5 (279 Views)

HP L&TT version 4.9

Hi,

 

Anybody know where to get this old version?

 

Ald

Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 23,261
Registered: ‎10-02-2001
Message 2 of 5 (273 Views)

Re: HP L&TT version 4.9

[ Edited ]

The history goes back to 4.10

 

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=406731&spf...

 

Why do you think you need this old version?

 

For some special cases there is still version 3.5 available:

 

ftp://ftp.hp.com/pub/information_storage/software/ltt/


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
Occasional Visitor
Aldrin Teo
Posts: 3
Registered: ‎01-24-2010
Message 3 of 5 (254 Views)

Re: HP L&TT version 4.9

I have an incident where after I update the firmware to the latest of DAT 72 USB Drive, the device lockup and the Clean LED show amber permenant.  I was using the latest HPL&TT 4.16.  I called HP support and was advise to get the version 4.9.  But today, HP support I can use version 4.10.

 

So I geuest I don't need 4.9 anymore.  Thanks.

 

Aldrin

Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 23,261
Registered: ‎10-02-2001
Message 4 of 5 (250 Views)

Re: HP L&TT version 4.9

This would mean they have a known issue since more than 3 years?

IMHO very unlikely.


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
Occasional Visitor
Aldrin Teo
Posts: 3
Registered: ‎01-24-2010
Message 5 of 5 (238 Views)

Re: HP L&TT version 4.9

It seems to be.  I was using 4.16 (the current) to update my customer DW0287A, DAT 72 external USB drive to ZUD4.  After flashing the firmware the drive lock up with error  - The diagnostic functions are operating in restricted mode.  Cannot event load the catridge in.  Thats when the support requested me to get the 4.09.  But 4.09 was not available, 4.10 will do.  But even with 4.10, my problem still not solve.  I have to schedule the support to remote in to the Win 2008 (64bit) server.  Will update this when possible.

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation