Re: ESL 322e: Firmware-update of IM doesn't work (154 Views)
Reply
Visitor
Spaci
Posts: 5
Registered: ‎04-02-2012
Message 1 of 8 (192 Views)

ESL 322e: Firmware-update of IM doesn't work

Hi,

 

I try to update the firmware of the IM from I231 to I232 but it seems that there isn't enough space on

the FTP server of the IM.  The ls command shows no files on the FTP server. When I logon to the IM CLI

an try the command e.g.  "download remove interface" I get the answer:

 

Remove the firmware file in <dirname>
syntax: remove <dirname>

where <dirname> is in:

 

How can I get more space free ?

 

Regards Thorsten

Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 22,953
Registered: ‎10-02-2001
Message 2 of 8 (185 Views)

Re: ESL 322e: Firmware-update of IM doesn't work

[ Edited ]

What happens if you do from CLI

 

> show firmware available

 

-->> upload the LTT_INTRFC-MGR01_I232.frm file via FTP to the IM

 

(while connected via FTP, use dir or ls to check no other files are there)

 

and do again

 

> show firmware available

 

 

 

Should look like this now:

 

/show/firmware>avail

Firmware files available
------------------------------------
LTT_INTRFC-MGR01_I232.frm

 

 

If this is shown, do from CLI:

 

> download mgmt

 

 

 


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
Visitor
Spaci
Posts: 5
Registered: ‎04-02-2012
Message 3 of 8 (173 Views)

Re: ESL 322e: Firmware-update of IM doesn't work

I can't upload the LTT_INTRFC-MGR01_I232.frm file via FTP to the IM.

I get an error message, that there is not enough space to store the file

but ls shows no other files there, so how can I free more space ?

Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 22,953
Registered: ‎10-02-2001
Message 4 of 8 (170 Views)

Re: ESL 322e: Firmware-update of IM doesn't work

Did you try to reboot the IM?

Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
Visitor
Spaci
Posts: 5
Registered: ‎04-02-2012
Message 5 of 8 (167 Views)

Re: ESL 322e: Firmware-update of IM doesn't work

yes, but no change to the problem

Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 22,953
Registered: ‎10-02-2001
Message 6 of 8 (164 Views)

Re: ESL 322e: Firmware-update of IM doesn't work

Let's compare the filesize:

 

"dir" is showing

 

28.341.030                           LTT_INTRFC-MGR01_I232.frm

 

 

 

c:\>fciv -add ltt_intrfc-mgr01_i232.frm -md5
//
// File Checksum Integrity Verifier version 2.05.
//
870a7f05f462d1beba15663ccc05ad7d ltt_intrfc-mgr01_i232.frm


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
Visitor
Spaci
Posts: 5
Registered: ‎04-02-2012
Message 7 of 8 (158 Views)

Re: ESL 322e: Firmware-update of IM doesn't work

It's no a problem of the filesize. I can't copy any file to the interface manager:

 

230 Guest login ok, access restrictions apply.
ftp> ls
200 PORT command successful.
550 No files found.
ftp> lcd D:\firmware
Local directory now D:\Firmware.
ftp> bin
200 Type set to I.
ftp> put LTT_HP_E1200-160_5963.frm
200 PORT command successful.
150 Opening BINARY mode data connection for LTT_HP_E1200-160_5963.frm.
> Netout :Software caused connection abort
452 Error writing file: No space left on device.
ftp: 65535 bytes sent in 0,02Seconds 4095,94Kbytes/sec.
ftp>

 

That firmware file has a size of only 1,6 MB and I can't upload it to the interface manager.

Please use plain text.
Acclaimed Contributor
Torsten.
Posts: 22,953
Registered: ‎10-02-2001
Message 8 of 8 (154 Views)

Re: ESL 322e: Firmware-update of IM doesn't work

[ Edited ]

The flash card is probably bad?

If you connect with the serial cable (speed 9600) you should see several disk related output during boot.

Maybe there are some failure messages?

But you may need a new IM flash card if the one inside has problems.


This card will probably come with newer firmware, so you need to be careful while updating the remaining components (steps are required, e.g. for the robotics)!

 

 

 

Another possible reason could be a large log or dump file on the card.

 

Consider to ask HP support for help to get root access and clear those files.

 

 

 

 

Example for IM boot:

 

General Software 80586 Embedded BIOS 2000 (tm) Revision 5.0

Copyright (C) 2001 General Software, Inc.

Arcom Control Systems GS BIOS V1.07 for HP Interface Manager(C) 2001 General Software, Inc.

80586-5.0-2065-AA6EFor more information: (800) 850-5755, sales@gensw.com, www.gensw.com.

Hit ^C if you want to run SETUP.
00000016K Low Memory Passed
00000590

00000000K Ext Memory Passed
00129472                                    Wait.....


PCI Device Table.

Bus Dev Func VendID DevID Class      Irq

 00  00  00   1078   0001  Host Bridge        

 00  0F  00   100B   0020  Ethernet           10

 00  10  00   100B   0020  Ethernet           9

 00  12  00   1078   0100  ISA Bridge         

 00  12  01   1078   0101  PCI Bridge         

 00  12  02   1078   0102  IDE Controller     

 00  12  03   1078   0103  Audio              

 00  13  00   0E11   A0F8  Serial Bus         9


Test on-board ethernet devices.

BlueCat Boot ................................
Linux version 2.4.10-1 (root@hpdm19) (gcc version 2.95.3 20010315 (release)) #885 Thu Mar 17 12:01:29 MST 2005

BIOS-provided physical RAM map:

 BIOS-e820: 0000000000000000 - 000000000009e400 (usable)

 BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)

 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

 BIOS-e820: 0000000000100000 - 0000000007f70000 (usable)

 BIOS-e820: 0000000040400000 - 0000000040800000 (reserved)

 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)

On node 0 totalpages: 32624

zone(0): 4096 pages.

zone(1): 28528 pages.

BUG: wrong zone alignment, it will crash

zone(2): 0 pages.

Kernel command line:

Initializing CPU#0

Working around Cyrix MediaGX virtual DMA bugs.

Calibrating delay loop... 111.00 BogoMIPS

Memory: 126528k/130496k available (803k kernel code, 3576k reserved, 180k data, 72k init, 0k highmem)

Checking if this processor honours the WP bit even in supervisor mode... Ok.

Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)

Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)

Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)

Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)

Page-cache hash table entries: 32768 (order: 5, 131072 bytes)

Working around Cyrix MediaGX virtual DMA bugs.

CPU: Cyrix Geode(TM) Integrated Processor by National Semi stepping 02

Checking 'hlt' instruction... OK.

Checking for popad bug... OK.

POSIX conformance testing by UNIFIX

PCI: PCI BIOS revision 2.10 entry at 0xff687, last bus=0

PCI: Using configuration type 1

PCI: Probing PCI hardware

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Starting kswapd v1.8

Journalled Block Device driver loaded

LED driver loaded.

keyboard: Timeout - AT keyboard not present?(ed)

keyboard: Timeout - AT keyboard not present?(f4)

Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled

ttyS00 at 0x03f8 (irq = 4) is a 16550A

ttyS01 at 0x02f8 (irq = 3) is a 16550A

block: queued sectors max/low 84040kB/28013kB, 256 slots per queue

RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize

Uniform Multi-Platform E-IDE driver Revision: 6.31

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

CS5530: IDE controller on PCI bus 00 dev 92

CS5530: chipset revision 0

CS5530: not 100% native mode: will probe irqs later

hda: STI Flash 7.2.0, ATA DISK drive

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

hda: 501760 sectors (257 MB), CHS=980/16/32

Partition check:

 hda: hda1 hda2 hda3 hda4

FDC 0 is a National Semiconductor PC87306

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 8192 bind 8192)

 hda: hda1 hda2 hda3 hda4

RAMDISK: Compressed image found at block 532

RAMDISK: Couldn't find valid RAM disk image starting at 532.

EXT2-fs warning: checktime reached, running e2fsck is recommended

VFS: Mounted root (ext2 filesystem).

Freeing unused kernel memory: 72k freed

BlueCat Loader S hda:hell
 hda1 hda2 hda3 hda4

 hda: hda1 hda2 hda3 hda4

kjournald starting.  Commit interval 5 seconds

EXT3-fs warning: maximal mount count reached, running e2fsck is recommended

EXT3 FS 2.4-0.9.6, 11 Aug 2001 on ide0(3,2), internal journal

EXT3-fs: recovery complete.

EXT3-fs: mounted filesystem with ordered data mode.

Trying to boot from 'current'
kernel: OK
rfs: OK
Loading kernel...
.....................................................................................
Done.
Loading rfs...
.............................................................................................................................................................................................................................................................................................................................................................................................................Switching to new kernel...

................
 login:


Hope this helps!
Regards
Torsten.

__________________________________________________

There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! star in the left column!   
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation