12-29-2013 05:49 AM
Hi Experts ,
I have installed OM 8.16 in my test mechine, Windows Server 2003 SP2 . It installed properly , and i have opended the OMW console .
Then i have installed OVPM 9.0 ,during installation it dint gave any error . After that i have rebooted the mechine and tried to open the oMW Console ,it gave error as attached screen-shot . But OVPM working properly .
Please suggest .
12-29-2013 11:47 PM
Try to restart the OMW process as might be possible that all services are not started.
Are you able to access OMW by any other means.
Also check log system.txt file for any error.
Assign Kudo, if found post useful and mark it accepted if solves the issue.
12-30-2013 12:57 AM
Thanks for your concern . I have already run the command, "vpstat -3 -r stop/start" . Still it shows the error as in first message screen shot .
Can i upgrade OMW agent from 8.6 to 11x first , and later install the OVPM 9 . Will it works ?
Or OVPM 9 will only work with OMW 9 ??
Plz suggest .
01-01-2014 05:55 PM
When you run the commands in the OMW 8.16 server do they show all process/services are running
Have you tried launching the OMW Web Console and see if that works or even that fails to load?
OMW 8.1x server is an old server and so you may want to upgrade the agent to OA 11.0x (HP has stopped supporting OM 8.x agents for some time now). I am not sure if it will help here but it will atleast get your server to more current configurations. Also if you plan to install any of the OMW 8.1x server patches then you would need to update the agent anyway as well.
Hope this helps.