Re: HP OM receiving SNMP (350 Views)
Reply
Occasional Contributor
Melkii
Posts: 4
Registered: ‎11-06-2013
Message 1 of 3 (371 Views)
Accepted Solution

HP OM receiving SNMP

Hello! 

I  have:

1) OMW Version 9.0, on the Win2008 r2.

2)server on Win serv 2008 r2 (name- One)

 

Server One - install agent v.11

 

I need: 

 

server generates SNMP. Each SNMP trap is assigned its value?
How can I configure the HP OM for receiving SNMP.

 

Thx.

 

P:S: Sorry for my English

HP Expert
Guciuciu
Posts: 132
Registered: ‎07-26-2011
Message 2 of 3 (362 Views)

Re: HP OM receiving SNMP

Hello Melkii,

 

From your post I understood that your Windows server called "One" sends traps to the OMW management server.

If this server "One" has its Operations Agent installed and traps arrive there, you can build a "SNMP Trap Interceptor" policy on your OMW console by setting up the necessary rules to match the incoming trap and then you can deploy this policy to your server "One". If the policy is correct, it should send a message to your OMW server.

If otherwise this server "One" sends trap directly to the OMW server, you will have to do the same but this time the "SNMP Trap Interceptor" policy has to be deployed on your OMW server.

 

Check also the following online help sections:

 

  • Configure SNMP conditions
  • Monitor SNMP devices
  • SNMP Interceptor Policies
  • Configure actions in SNMP interceptor policies
  • Configure SNMP interceptor policy options
  • Configure message defaults in SNMP interceptor policies 

 

HTH,

HP Support
If you find this or any post resolves your issue, please make sure to mark it as an "Accepted as Solution".
If you liked the reply then please show this with KUDOs.
Occasional Contributor
Melkii
Posts: 4
Registered: ‎11-06-2013
Message 3 of 3 (350 Views)

Re: HP OM receiving SNMP

Hello! 

Thanks fo reply!

 

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.