Type 111 errors in LOGTOOL - anything to be concerned about ? (350 Views)
Reply
Occasional Contributor
sean_h
Posts: 2
Registered: ‎01-03-2012
Message 1 of 1 (350 Views)

Type 111 errors in LOGTOOL - anything to be concerned about ?

Hi all,

 

I have noticed some TYPE 111 error in LOGTOOL on my 957SX running MPE/iX 6.5 server and wanted to understand whether these are anything to be concerned about as we will be physically relocating the server in 4 weeks time to a new data centre.

 

The reason i ask and for spotting this is that i have 2 systems for which the Full system on my 60GB server takes 4.5 hrs, but the server with only 40GB takes 7.5hrs with a physically LESS number of files too !!!

 

So, i have been looking for potential hardware issues that may be the culprit.

 

Here is a sample (and the complete list of TYPE 111's are attached for others enjoyment !) :

 

===============================================================================
SUN, JUL 1, 2012 1:03 PM LOG8168.PUB.SYS SYSTEM (PIN 261)
I/O ERROR
PRODUCT NAME: PDEV: 62
LDEV: DEVICE CLASS: 15
I/O EVENT CLASS: Software LLIO STATUS: $0000006F

MPE/XL I/O Status: Proc. Num. = 0, Error Num. = 0, Subsystem = 111

RETRY SCHEME: Summarized Retries WILL RETRY: NO
I/O RESULT: I/O Failed RUN AUTODIAG: NO
RETRY COUNT: 0 MGR PORT NUM.: $0
TRANS. NUM.: $0 # HDWR BYTES: 0
HARDWARE STATUS:

No hardware status was logged.

DATA LEN: 32 MGR CODE: 111
HLIO PROCEDURE: enable_term_signal_cLDEV NUMBER: 79
MPE XL STATUS: $FFCC0071 PROC DEPEND. PARM4: $94
PROC DEPEND. PARM5: $0 PROC DEPEND. PARM6: $0
PROC DEPEND. PARM7: $0 PROC DEPEND. PARM8: $1
===============================================================================

 

or............

 

===============================================================================
MON, JUL 2, 2012 7:54 AM LOG8169.PUB.SYS SYSTEM (PIN 261)
I/O ERROR
PRODUCT NAME: HPC1537A PDEV: 52.0.0
LDEV: 7 DEVICE CLASS: 15
I/O EVENT CLASS: Other LLIO STATUS: Successful
RETRY SCHEME: Summarized Retries WILL RETRY: NO
I/O RESULT: I/O Successful RUN AUTODIAG: NO
RETRY COUNT: 0 MGR PORT NUM.: $FFFFFF76
TRANS. NUM.: $114F649 # HDWR BYTES: 0
HARDWARE STATUS:

No hardware status was logged.

DATA LEN: 12 MGR CODE: 243
RECORD TYPE: LOG SENSE CURR GRPS WRITTEN: 282
CURR RAW RETRIES: 5 CURR GRPS READ: 2
CURR ECC3 RETRIES: 0 CLEAN ME: DEVICE IS CLEAN
===============================================================================

 

Can anyone out there offer any direction or advice please ?

 

Thanks in advance.

 

Sean

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation